KIT-BRAKE 1049964 - Caterpillar

Type "Network" in search bar.
Illustration 42 g03861973
(16) "Network"
Select "Network" (16).
Illustration 43 g03861976
(17) "Network Proxy"
Select "Network Proxy" (17).
Illustration 44 g03861977
(18) "Manual"
Select "Manual" (18) in Method drop-down.
Illustration 45 g03861981
Enter the information (Illustration 45) into the proxy setting window (the information should already be typed in).
Illustration 46 g03861983
(19) "Apply system wide"
When all information is entered, press "Apply system wide" (19) and enter the root password when prompted. Close the window after entering the root password.Additional Software
Note: All software selections provided in this section are already installed with the new Command for Hauling OCS Live CD installation. This is provided for notation.SSH Server and Client (Installed by Default)
To install an SSH server so that other computers can SSH into the laptop, run the following commands in a new terminal window and enter the root password when prompted:
sudo apt-get install opens sh-server
sudo restart sshWireshark (Installed by Default)
To install Wireshark on the OCS laptop, run the following command, and enter the root password when prompted:
sudo apt-get install wireshark
sudo dpkg-reconfigure wireshark-common
sudo usermod -a -G wireshark $USERUse the Wireshark web site to find official tutorials:http:///www.wireshark.org/docs/wsug_html_chunked/ChapterUsing.html
Wine (Installed by Default)
Wine should be installed to run POSVIEW on OCS. To install Wine on the OCS laptop, run the following command and enter the root password when prompted:
sudo apt-get install winePOSView (Installed by Default)
To install POSView, Wine needs to be installed. After Wine is installed, all that is required is the "Windows Executable" for the POSView software to run on the computer. Right-click on the exe file and open the exe file with the Wine.Network Manager Settings (Already Configured)
Note: Two laptops with the same IP on the same network will have conflicts.The following networks should be set up:
Table 1
Name IPV4 IP Netmask Gateway
Truck Eth0 165.26.79.150 255.255.254.0 165.26.78.1
Truck Eth1 192.168.3.150 0.0.0.0 Changing Default Password for Pathfinder Account
Illustration 47 g06218601
Open the system settings by clicking the "gear" at the top right of the user session and selecting "System Settings…".
Illustration 48 g06218604
Once the system settings open, select "User Accounts".
Illustration 49 g06218605
Once the User Accounts window loads, click the dots next to "Password" to change the current password.
Illustration 50 g06218608
Follow the on-screen prompt to enter in the current and new desired password. Once all the information has been entered, click "Change". If this is a fresh OCS installation, contact product support for the default password for the Pathfinder account.Note: The "New password" and "Confirm password" should match, for the "Change" button to become active.