10R9347 KIT-ENGINE OVERHAUL Caterpillar parts
C-15
Rating:
Alternative (cross code) number:
CA10R9347
10R-9347
10R9347
CA10R9347
10R-9347
10R9347
Weight: 958 pounds 434 kg.
TRUCK ENGINE,
Compatible equipment models: 10R9347:
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 468-8116 Socket 1
B - Loctite Nickel Anti-Seize Compound 1
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool.
Turn the battery disconnect switch to the OFF position.
Open the hood.
Illustration 1 g03737700
Illustration 2 g03737742
Cut cable straps (1), (2), and (3). Disconnect harness assembly (5). Use Tooling (A) to remove nitrogen oxide sensor (4).Installation Procedure
Install nitrogen oxide sensor (4) in the reverse order of removal.
Lubricate the threads of nitrogen oxide sensor (4) with Tooling (B).Note: If a new nitrogen oxide sensor is being installed, do not apply Tooling (B) to the threads. New nitrogen oxide sensors should have the required lubricant already on the threads.
Use Tooling (A) to install nitrogen oxide sensor (4). Tighten nitrogen oxide sensor (4) to a torque of 50 10 N m (37 7 lb ft).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 468-8116 Socket 1
B - Loctite Nickel Anti-Seize Compound 1
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool.
Turn the battery disconnect switch to the OFF position.
Open the hood.
Illustration 1 g03737700
Illustration 2 g03737742
Cut cable straps (1), (2), and (3). Disconnect harness assembly (5). Use Tooling (A) to remove nitrogen oxide sensor (4).Installation Procedure
Install nitrogen oxide sensor (4) in the reverse order of removal.
Lubricate the threads of nitrogen oxide sensor (4) with Tooling (B).Note: If a new nitrogen oxide sensor is being installed, do not apply Tooling (B) to the threads. New nitrogen oxide sensors should have the required lubricant already on the threads.
Use Tooling (A) to install nitrogen oxide sensor (4). Tighten nitrogen oxide sensor (4) to a torque of 50 10 N m (37 7 lb ft).
Caterpillar parts catalog:
Parts kit Caterpillar catalog:
16G, 16H NA, 24H, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412E, 365C, 365C L, 365C L MH, 375, 375 L, 5080, 578, 583T, 589, 621F, 621G, 623E, 623F, 623G, 627B, 627F, 627G, 6...
14M, 16M, 24M, 3011C, 3406E, 345C, 345C MH, 345D L, 349D, 365C, 365C L, 365C L MH, 583T, 621G, 621H, 623E, 623F, 623G, 623H, 627F, 627G, 627H, 657E, 657G, 735, 735B, 740, 770, 770G, 770G OEM, 772, 773...
C-15, C-16, C16
1673C, 3176, 3176B, 3176C, 3196, 3306, 3306C, 3406B, 3406C, 3406E, 3408, 3408C, 3408E, 3412, 3456, 623F, C-10, C-12, C-15, C-16
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 1673C, 1...
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H, 14H NA, 160H, 160H ES, 160H NA, 163H, 163H NA, 1673C, 16G, 16H, 16H NA, 3114, 3116, 3126, 3126...
3116, 3126, 3126B, 3176B, 3176C, 3196, 3304, 3306, 3306B, 3306C, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3456, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 35...
120G, 120M, 12G, 12H, 12H ES, 12H NA, 12M, 130G, 140G, 140H, 140H ES, 140H NA, 140M, 143H, 14G, 14H, 14H NA, 14M, 160G, 160H, 160H ES, 160H NA, 160M, 163H, 163H NA, 1673C, 16G, 16H, 16H NA, 16M, 215B,...
3176C, 3196, 3406B, 3406C, 3406E, 3456, C-10, C-12, C-15, C-16, C-18, C16, C18
3406E, C-12, C-15
3406E, C-15
C-15
3457245
KIT-GASKET
C-15, C-16
C-15, C-16
3457568
KIT-GASKET
C-15, C-16
C-15, C-16
C-15
C-15
C-15
C-12
2441418
KIT-GASKET
C-12
C-12
2440730
KIT-GASKET
C-12
C-12
