KIT-SEAL 1207351 - Caterpillar

Illustration 1 g00746121
Table 1
Clearance Between the Components Diameter Across the Components Running(1) Clearance
(A) Stator and Turbine New 1.76 to 1.94 mm (0.07 to 0.076 inch) 0.88 to 0.97 mm (0.035 to 0.038 inch)
100% Worn 2.15 mm (0.085 inch) 1.07 mm (0.042 inch)
(B) Stator and Impeller New 1.17 to 1.32 mm (0.046 to 0.052 inch) 0.58 to 0.66 mm (0.023 to 0.026 inch)
100% Worn 1.54 mm (0.061 inch) 0.77 mm (0.030 inch)
(1) Half the clearance across the diameter (1) Torque for six bolts that hold the retainer to the housing ... 50 7 N m (37 5 lb ft) (2) Torque for eight bolts that hold the stator to the carrier ... 40 5 N m (30 4 lb ft) (3) Torque for 36 bolts that hold the impeller to the housing ... 30 5 N m (22 4 lb ft) (4) Torque for eight bolts that hold the carrier to the impeller ... 50 7 N m (37 5 lb ft) (5) Lubricate the lip of the seal with SAE 30W oil. (6) Torque for bolt that holds the yoke to the shaft ... 115 5 N m (85 5 lb ft) (7) Outside diameter of shaft in the bearing area ... 44.437 0.013 mm (1.7495 0.0005 inch)Inside diameter of bearings after installation ... 44.501 0.013 mm (1.7520 0.0005 inch) (8) Inside diameter of planetary gear ... 34.399 0.008 mm (1.3543 0.0003 inch) (9) Diameter of planetary shaft ... 26.439 0.005 mm (1.0409 0.0002 inch)