KIT-GASKET 1236598 - Caterpillar

Illustration 1 g01951446
(3) Housing for the rocker shaft assembly
(4) Seal
Note: Before assembly, lubricate the components with clean engine oil. (1) Tighten the bolts for the housing of the rocker shaft to the following torque. ... 10 N m (7.4 lb ft) (2) Tighten the nuts for the housing of the rocker shaft to the following torque. C0.5 and C0.7 ... 10 N m (7.4 lb ft)C1.1/3011C and C1.6 ... 23 N m (17 lb ft)C1.5/3013C and C2.2/3024C and C2.2/3024CT ... 33 N m (24 lb ft)
Illustration 2 g01951472
(6) Stud (5) Rocker shaft C0.5 and C0.7 Diameter of the rocker shaft ... 9.95 to 9.968 mm (0.3917 inch to 0.3924)Service limit ... 9.87 mm (0.3886 inch)C1.1/3011C, C1.5/3013C and C1.6 Diameter of the rocker shaft ... 11.65 to 11.67 mm (0.4587 to 0.4595 inch)Service limit ... 11.57 mm (0.4555 inch)C2.2/3024C and C2.2/3024CT Diameter of the rocker shaft ... 14.95 to 14.97 mm (0.5886 to 0.5894 inch)Service limit ... 14.87 mm (0.5854 inch)
Illustration 3 g01951474
(8) Adjustment screw for the rocker arm
(9) Rocker arm (7) Tighten the locknut to the following torque. ... 14 N m (10 lb ft) (10) Rocker arm clearance on the rocker shaft C0.5 and C0.7 Minimum permissible clearance ... 0.032 to 0.065 mm (0.00126 to 0.00260)C1.1/3011C, C1.5/3013C and C1.6 Minimum permissible clearance ... 0.032 to 0.068 mm (0.00126 to 0.00268 inch)C2.2/3024C and C2.2/3024CT Minimum permissible clearance ... 0.030 to 0.093 mm (0.00120 to 0.00366 inch)Maximum permissible clearance (All models) ... 0.2 mm (0.008 inch)