1262029 KIT-SEAL Caterpillar parts
320B, 320B L, 345B, 345B L, OEMS
Rating:
Alternative (cross code) number:
CA1262029
126-2029
1262029
CA1262029
126-2029
1262029
Weight: 0.28 pounds 0 kg.
EXCAVATOR, UNDERCARRIAGE,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
1262029 Seal KIT (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 0.44 lbs || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 0.44 lbs || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
$41.18
03 May 2022
US: Florida-Parts-Z
1262029 - Seal KIT fit Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
$36.63
11 Feb 2019
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
CATERPILLAR SEAL KIT 1262029 NEW
Number on catalog scheme:
None
For full view, you need register
Compatible equipment models: 1262029:
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Accidental engine starting can cause injury or death to personnel working on the equipment.To avoid accidental engine starting, disconnect the battery cable from the negative (−) battery terminal. Completely tape all metal surfaces of the disconnected battery cable end in order to prevent contact with other metal surfaces which could activate the engine electrical system.Place a Do Not Operate tag at the Start/Stop switch location to inform personnel that the equipment is being worked on.
Disconnect the batteries. Refer to Operation and Maintenance Manual, "Battery or Battery Cable - Disconnect".
Illustration 1 g01092683
Put an identification mark on the harness assemblies that are connected to electric starting motor (3) and solenoid (1).
Disconnect the harness assemblies from solenoid (1).
Disconnect the harness assembly from electric starting motor (3).
Remove bolts (4). Use two people to remove electric starting motor (3) and gasket (5) from the flywheel housing. The weight of electric starting motor (3) is approximately 36 kg (80 lb).
If necessary, remove connector (2) and solenoid (1) from electric starting motor (3). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01092683
Illustration 3 g01243248
Position gasket (5) and use two people to install electric starting motor (3) on the flywheel housing. The weight of electric starting motor (3) is approximately 36 kg (80 lb). Install bolts (4).
If necessary, install connector (2). Tighten nuts (8) and (9) to a torque of 31 4 N m (23 3 lb ft).
Connect the harness assemblies on solenoid (1). Tighten nuts (6) and (7) to a torque of 2.25 0.25 N m (20 2 lb in).
Connect the harness assemblies on the electric starting motor. Tighten nut (10) to a torque of 31 4 N m (23 3 lb ft).
Connect the batteries. Refer to Operation and Maintenance Manual, "Battery or Battery Cable - Disconnect".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Accidental engine starting can cause injury or death to personnel working on the equipment.To avoid accidental engine starting, disconnect the battery cable from the negative (−) battery terminal. Completely tape all metal surfaces of the disconnected battery cable end in order to prevent contact with other metal surfaces which could activate the engine electrical system.Place a Do Not Operate tag at the Start/Stop switch location to inform personnel that the equipment is being worked on.
Disconnect the batteries. Refer to Operation and Maintenance Manual, "Battery or Battery Cable - Disconnect".
Illustration 1 g01092683
Put an identification mark on the harness assemblies that are connected to electric starting motor (3) and solenoid (1).
Disconnect the harness assemblies from solenoid (1).
Disconnect the harness assembly from electric starting motor (3).
Remove bolts (4). Use two people to remove electric starting motor (3) and gasket (5) from the flywheel housing. The weight of electric starting motor (3) is approximately 36 kg (80 lb).
If necessary, remove connector (2) and solenoid (1) from electric starting motor (3). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01092683
Illustration 3 g01243248
Position gasket (5) and use two people to install electric starting motor (3) on the flywheel housing. The weight of electric starting motor (3) is approximately 36 kg (80 lb). Install bolts (4).
If necessary, install connector (2). Tighten nuts (8) and (9) to a torque of 31 4 N m (23 3 lb ft).
Connect the harness assemblies on solenoid (1). Tighten nuts (6) and (7) to a torque of 2.25 0.25 N m (20 2 lb in).
Connect the harness assemblies on the electric starting motor. Tighten nut (10) to a torque of 31 4 N m (23 3 lb ft).
Connect the batteries. Refer to Operation and Maintenance Manual, "Battery or Battery Cable - Disconnect".
Caterpillar parts catalog:
Parts kit Caterpillar catalog:
330C, 345B II, 345B L, 350, M325C MH, M325D L MH
330, 330B L, 345B II, 345B L
330B L, 345B II, 345B II MH, 345B L
330B, 330B L, 345B, 345B L
325B L, 345B L
330B L, 345B II, 345B L, 365B, 365B II, 385B
325B L, 328D LCR, 330B, 330B L, 345B L
345B, 345B L
345B II, 345B L
345B II, 345B L
345B II, 345B L, 365B
345B II, 345B L, 365B
320B, 322B
320B, 325B, 330C L
320B, 320B L, 320C, 322C
320B
1453807
KIT-SEAL
M320
M320
525B, 525C, 535B, 535C, 545, 545C
2143225
KIT-SEAL
535C, 545, 545C
535C, 545, 545C
1690779
KIT-SEAL
535B, 545
535B, 545
1363686
KIT-GASKET
12H ES, 12H NA, 545
12H ES, 12H NA, 545
