KIT-SEAL 1327008 - Caterpillar

355-2393 Piston Pump Gp
Illustration 5 g02937137
Illustration 6 g02937138
Detail view of D 381-1102 Pump Control Valve Gp
Table 3
Specification for 355-2391 Piston Pump Gp    
Item     Qty     Part     Specification Description    
1     4     9S-8004 O-Ring Plug     Torque to
12.0 1.2 N m (106.2 10.6 lb in).    
2     2     254-3426 Relief Valve Gp     Torque to
240 24 N m (177 18 lb ft).    
3     1     144-9103 Plug     Torque to
70 7 N m (52 5 lb ft).    
4     1     119-0964 Orifice     Torque to
12.0 1.2 N m (106.2 10.6 lb in).    
5     1     254-3425 Pump Control Valve Gp     Torque to
50 5 N m (37 4 lb ft).    
6     8     196-9444 Bolt     Torque to
6.1 0.6 N m (54.0 5.3 lb in).    
7     4     8T-2922 Bolt     Torque to
10.4 1.0 N m (92.0 8.9 lb in).     391-1457 Pump Rotating Gp
Illustration 7 g02937139
Table 4
Item     Qty     Part     Specification Description    
-     As required, use the following shim to obtain dimension (F) of
130.8 to 131.0 mm (5.15 to 5.16 inch).
Use a spacer thickness of
4.47 to 4.51 mm (0.176 to 0.178 inch) in place of spring (8) to determine the requirement of shims to obtain dimension (G). Dimension (G) is
4.5 mm (0.18 inch). Replace the spacer with the spring after the correct dimension is achieved.    
-     1     6E-4367 Shim     Thickness is
0.6 mm (0.02 inch).    
-     1     6E-4366 Shim     Thickness is
0.8 mm (0.03 inch).    
-     1     6E-4365 Shim     Thickness is
1.0 mm (0.04 inch).    
-     1     6E-4364 Shim     Thickness is
1.2 mm (0.05 inch).