KIT-GASKET 1390616 - Caterpillar

Remove Timing Gear Cover
START BY:a. remove water pumpb. remove fan drivec. remove air compressord. remove oil pane. remove crankshaft front seal and wear sleevef. remove engine front support 1. Remove support plate (1) that fastens the upper timing gear cover to the cylinder head assembly. 2. Remove six accessory drive covers to timing gear cover bolts (2).3. Remove two fuel injection pump housing to timing gear cover bolts (3) and two plates to cover bolts (4). 4. Remove the five timing gear covers to cylinder block bolts, and remove timing gear cover (5).Install Timing Gear Cover
1. Be sure that O-ring seal (1) is in position in the timing gear plate as shown. 2. Put a new gasket in position, and install timing gear cover (2) over the two dowel pins in the cylinder block.3. Install the bolts that hold the timing gear cover to the cylinder block. Cut the cover gasket to make it even with the surface of the cylinder block and bottom of the timing gear cover.4. Install the bolts that hold the accessory drive cover to the timing gear cover. Install the fuel injection pump housing to timing gear cover bolts and two plates to cover bolts.5. Install the support plate that fastens the upper timing gear cover to the cylinder head assembly.END BY:a. install crankshaft front seal and wear sleeveb. install oil panc. install air compressord. install fan drivee. install water pumpf. install engine front support