KIT-SEAL 1405565 - Caterpillar

Right Side Plate Raise/Hold - Press and hold the up arrow button to raise the side plate. When the button is released, the side plate goes into float. If the button is pressed and released again within 0.75 seconds, the side plate goes into hold. When a side plate is being raised or is in hold, the corresponding side plate warning lights on the side of machine will flash.Right Side Plate Lower/Float (55)
Right Side Plate Lower/Float - Press and hold the button to lower the side plate. When the button is released, the side plate goes into float mode.Moldboard Lower/Float (56)
Moldboard Lower/Float - Press the down button to lower the moldboard. When the button is released, the moldboard goes into float mode.Left Side Plate Lower/Float (57)
Left Side Plate Lower/Float - Press and hold the button to lower the side plate. When the button is released, the side plate goes into float mode.Rear Right Leg Lower (58)
Rear Right Leg Lower - Press the button to raise the rear right leg.Rear Left Leg Lower (59)
Rear Left Leg Lower - Press the button to raise the rear left leg.Rear Legs Lower (60)
Rear Legs Lower - Press the button to raise the rear legs.Joystick (10)
Left - Move the joystick to the left to steer the machine left.
Right - Move the joystick to the right to steer the machine right.
Lower - Push the joystick upward to propel the machine forward.
Raise - Pull the lever backward to propel the machine backward.
Illustration 9 g06101731Conveyor Left (61)
Press and hold the button to move the upper conveyor to the left.Conveyor Raise (62)
Press and hold the button to raise the upper conveyor.Conveyor Right (63)
Press and hold the button to move the upper conveyor to the right.Propel Interlock (64)
To enable propel in the Forward or reverse direction, press propel interlock button (64) on the joystick. When the button is pressed, propel is allowed in either the Forward or reverse direction for 6 seconds. If the joystick is moved within 6 seconds, the button does not need to be pressed again until the machine is stopped. If the joystick is not moved within 6 seconds, the propel interlock button must be pressed again.Right Side Plate Raise/Hold (65)
Right Side Plate Raise/Hold - Press and hold the up arrow button to raise the side plate. When the button is released, the side plate goes into float. If the button is pressed and released again within 0.75 seconds, the side plate goes into hold. When a side plate is being raised or is in hold, the corresponding side plate warning lights on the side of machine will flash.Right Side Plate Lower/Float (66)
Right Side Plate Lower/Float - Press and hold the button to lower the side plate. When the button is released, the side plate goes into float mode.Horn (67)
Push the button to sound the horn. Use the horn for alerting personnel or for signaling personnel.Conveyor Lower (68)
Press the button to lower the upper conveyor.