1409902 KIT-GASKET Caterpillar parts
834B, 836, 988F II, PM-565
Rating:
Alternative (cross code) number:
CA1409902
140-9902
1409902
CA1409902
140-9902
1409902
Weight: 0.43 pounds 0 kg.
COLD PLANER, WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$46.13
30 May 2022
US: Florida-Parts-Z
1409902 - KIT-Gasket fit Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
$46.13
30 May 2022
US: Florida-Parts-Z
1409902 - KIT-Gasket fit Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
18 Aug 2017
.51[0.00] pounds
CTP: CTP
Caterpillar GASKET KIT (1409902)
1409902 Weight(lbs): 0.50 Length(cm): 22.0000 Width(cm): 4.7000 Depth(cm): 22.0000
1409902 Weight(lbs): 0.50 Length(cm): 22.0000 Width(cm): 4.7000 Depth(cm): 22.0000
For full view, you need register
Compatible equipment models: 1409902:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: This procedure was done on a G3612 Engine. This procedure is TYPICAL for all models that are equipped with a generator.
Illustration 1 g01031948
Remove the coupling guard (2), generator guard (3), and flywheel guard (1).
Illustration 2 g00589972
Illustration 3 g00589973
Illustration 4 g00589974
Remove the bolts which connect the engine coupling flange (6) and the generator coupling flange (5). Remove coupling plate (7).
Illustration 5 g01031950
Remove filters (11) in order to expose the mounting bolts and the access holes to the dowels on the right side of the generator base. Note: Machining of the dowel holes and the installation of the dowel pins was completed at the time of the final alignment.Note: Mark the location of the generator on the base. Maintain the shims in the proper location for the installation procedure.
Use a 1/2 inch bolt and a washer to remove the dowels (13).
Loosen the alignment bolts (8).
Remove bolts (9). Check the seals on the bolts for damage. If necessary, replace the seals.
Install Tooling (A) and a suitable lifting device on the generator.
Remove the generator (10) from the generator base. Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2
Illustration 6 g01031950
Attach Tooling (A) and a suitable lifting device on the generator.
Position the generator (10) on the generator base.
Check the seals on the bolts for damage. If necessary, replace the seals. Ensure that the seals are installed on clean bolts. Install bolts (9).
Tighten bolts (8).
Install the dowels (13).
Install the four filters (11).
Illustration 7 g00589974
Illustration 8 g00589973
Illustration 9 g00589972
Install coupling plate (7). Install the bolts that connect engine coupling flange (6) to generator coupling flange (5).
Illustration 10 g01031948
Install flywheel guard (1), generator guard (3), and coupling guard (2).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: This procedure was done on a G3612 Engine. This procedure is TYPICAL for all models that are equipped with a generator.
Illustration 1 g01031948
Remove the coupling guard (2), generator guard (3), and flywheel guard (1).
Illustration 2 g00589972
Illustration 3 g00589973
Illustration 4 g00589974
Remove the bolts which connect the engine coupling flange (6) and the generator coupling flange (5). Remove coupling plate (7).
Illustration 5 g01031950
Remove filters (11) in order to expose the mounting bolts and the access holes to the dowels on the right side of the generator base. Note: Machining of the dowel holes and the installation of the dowel pins was completed at the time of the final alignment.Note: Mark the location of the generator on the base. Maintain the shims in the proper location for the installation procedure.
Use a 1/2 inch bolt and a washer to remove the dowels (13).
Loosen the alignment bolts (8).
Remove bolts (9). Check the seals on the bolts for damage. If necessary, replace the seals.
Install Tooling (A) and a suitable lifting device on the generator.
Remove the generator (10) from the generator base. Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2
Illustration 6 g01031950
Attach Tooling (A) and a suitable lifting device on the generator.
Position the generator (10) on the generator base.
Check the seals on the bolts for damage. If necessary, replace the seals. Ensure that the seals are installed on clean bolts. Install bolts (9).
Tighten bolts (8).
Install the dowels (13).
Install the four filters (11).
Illustration 7 g00589974
Illustration 8 g00589973
Illustration 9 g00589972
Install coupling plate (7). Install the bolts that connect engine coupling flange (6) to generator coupling flange (5).
Illustration 10 g01031948
Install flywheel guard (1), generator guard (3), and coupling guard (2).
Caterpillar parts catalog:
Parts kit Caterpillar catalog:
120G, 120H, 120H ES, 120H NA, 12G, 12H ES, 12H NA, 130G, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 235, 3114, 3116, 3126, 3126B, 317...
120G, 12G, 130G, 140G, 160G, 16G, 416B, 416C, 416D, 420D, 424D, 426B, 426C, 428, 428B, 428C, 428D, 430D, 432D, 436C, 438B, 438C, 438D, 442D, 621E, 621F, 621G, 621H, 623E, 623F, 623G, 623H, 627E, 627F,...
30/30, 428, 5130, 65C, 75C, 75D, 85C, 85D, 918F, 924F, 928F, 928G, 928H, 928HZ, 938F, 938G, 938G II, 950F II, 966F II, 970F, 988F, 988F II, AP-1000, AP-1000B, AP-1055B, AP-650B, AP-800C, AP-800D, AP-9...
30/30, 428, 5130, 65C, 75C, 75D, 85C, 85D, 918F, 924F, 928G, 928H, 928HZ, 988F, 988F II, AP-1000, AP-1000B, AP-1055B, AP-650B, AP-800C, AP-800D, AP-900B, BG-225B, BG-225C, BG-2455C, BG-245C, D4H, D4H ...
1090, 1190, 1190T, 1290T, 12G, 1390, 140G, 322B L, 325B, 345B II, 350, 3508B, 3512, 3512B, 3512C, 3516B, 3516C, 375, 426C, 436C, 438C, 438D, 442D, 511, 515, 521, 522, 525, 525B, 532, 539, 541, 550, 55...
24H, 3406B, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412E, 5110B, 589, 631D, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 69D, 769C, 769D, 771C, 771D, 773B, 773D, 773E, 775B, 775D, 775E, 834B, 836, 84...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 143H, 14G, 14H, 14H NA, 14M, 160G, 160H, 16...
24H, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412E, 589, 631E, 633E II, 637E, 651E, 657E, 769C, 769D, 771C, 771D, 773B, 773D, 775B, 775D, 834B, 836, 988B, 988F, 988F II, 990, 990 II, 992C, 992D, D10N,...
3408, D8L, PM-565
1090, 1190, 1190T, 1290T, 12M 2, 1390, 140M, 160M, 2290, 2390, 2391, 2491, 2590, 320B FM LL, 320C FM, 320D, 320D FM, 320D FM RR, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325B L, 325C FM, 325D FM, 3...
525B, 615C, 621F, 623E, 623F, 627F, 793B, 814F, 814F II, 815F, 815F II, 816F, 816F II, 924F, 928G, 938F, 938G, 950F, 950F II, 950G, 950G II, 960F, 962G, 962G II, 966D, 966F II, 966G, 966G II, 970F, 97...
631E, 633E II, 637E, 834B, 836, 988F II, PM-565, PM-565B
988F II
834B, 836, 988F II, D9R
988F II
1488269
KIT-GASKET
988F II
988F II
988F II, D9R
1307757
KIT-SEAL
980G, 980G II
980G, 980G II
1910983
KIT-SEAL
834B, 988F II
834B, 988F II
1691761
KIT-VALVE
834B, 988F II
834B, 988F II
1910981
KIT-SEAL
834B, 988F II
834B, 988F II
988F II
769D, 771D, 988F II
988F II