KIT-GASKET 1411025 - Caterpillar

(1) Torque for bolts ... 60 to 70 lb. ft.(80 to 95 N m)(2) End play for the camshaft ... .006 to .010 in.(0.15 to 0.25 mm) Maximum permissible play ... .020 in.(0.51 mm)(3) Diameter of bearing surface (journal) of the camshaft ... 2.966 to 2.967 in.(75.34 to 75.36 mm) Bore in bearing for camshaft ... 2.970 .001 in.(75.44 0.03 mm)Maximum permissible clearance between bearing and camshaft bearing surfaces (journals) ... .009 in.(0.23 mm)(4) Timing marks for camshaft and balancer (D379 Engines only).(5) Timing marks for crankshaft and camshaft gears (All engines).(6) SAE Opposite Rotation (clockwise engine), put cluster gear on end of camshaft with "F" mark.(7) SAE Standard Rotation (counterclockwise engine), put cluster gear on end of camshaft without "F" mark. Specifications (8) and (9) for D379 Engines only.(8) Bore in bearing for balance gear ... 1.6036 .0019 in.(40.731 0.048 mm) Diameter of bearing surface (journal) of balance gear shaft ... 1.5998 .0002 in.(40.635 0.005 mm)Maximum permissible clearance between bearing and bearing surface (journal) ... .006 in.(0.15 mm)(9) End play of balancer gear ... .004 to .012 in.(0.10 to 0.30 mm) Maximum permissible end play ... .019 in.(0.48 mm)