KIT-SEAL 1588942 - Caterpillar

Table 2
Linkage Bearings    
View    Bearing    Bearing Diameter    Depth at Assembly    Part Number    
B-B     12    
76.20 .03 mm ( 3.000 .001 inch)    
7.6 1.0 mm ( .30 .04 inch)     2V-0707    
B-B     5    
89.19 .02 mm (3.510 .001 inch)    
10.0 1.0 mm (.39 .04 inch)     3V-2333    
C-C     14    
82.84 .02 mm (3.260 .001 inch)    
8.9 1.0 mm (.35 .04 inch)     3G-5111    
D-D     11    
76.20 .03 mm (3.000 .001 inch)    
7.6 1.0 mm ( .30 .04 inch)     2V-0707    
E-E     15    
63.74 .02 mm (2.510 .001 inch)    
8.5 1.0 mm (.34 .04 inch)     7P-3454    
F-F     19, 30    
70.10 .02 mm (2.760 .001 inch)    
11 1.0 mm (.43 .04 inch)     4V-2883    
G-G     25    
78.0 .5 mm (3.10 .02 inch)    
9.0 1.0 mm (.35 .04 inch)     4V-8674    
H-H     29    
66.0 .5 mm (2.60 .02 inch)    
10 1.0 mm (.40 .04 inch)     5V-1874    
J-J     32    
66.0 .5 mm (2.60 .02 inch)    
10 1.0 mm (.40 .04 inch)     5V-1874    Note: Lubricate all pin bores with a 5P-0960 Grease Cartridge. Lubricate the lips of all seals with the lubricant that is being sealed.As required, install washers in order to center the lift arm and the frame. This will enable the lift arm assembly to be centered between the bosses on the nonengine end. Maintain a minimal clearance. (3) 5V-0353 Washer (thickness) ... 1.6 mm (.06 inch) Inside diameter ... 65.0 mm (2.56 inch) (4) 8R-2912 Washer (thickness) ... 1.6 mm (.06 inch) Inside diameter ... 78 mm (3.1 inch) (26) As required, install washers at the spaces between the lift arm and the attachment. This will allow the attachment to be centered in the lift arm assembly. 5V-0353 Washer (thickness) ... 1.6 mm (.06 inch) Inside diameter ... 65.0 mm (2.56 inch) (21) As required, install shims between the lever and the attachment. This will allow the attachment to be centered in the lift arm assembly. 122-6520 Shim (thickness) ... 3.18 .15 mm (.125 .006 inch) Inside diameter ... 66.7 1.0 mm (2.63 .04 inch) 122-6521 Shim (thickness) ... 6.35 .30 mm (.250 .010 inch) Inside diameter ... 66.7 1.0 mm (2.63 .04 inch)