KIT-BRAKE RESERVOIR 1597907 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     132-8223     Hydraulic Pump and Motor Gp     1    
1U-6221 Hydraulic Torque Wrench Gp     1    
132-8143 Wrench Link     1    
B     138-7573     Link Bracket     2    
C     -     Forcing Screw (24 mm by 3 mm by 3 inch)     1    Start By:
Remove the swing motor. Refer to Disassembly and Assembly, "Swing Motor - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Drain the oil from the swing drive into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Swing Drive Oil - Change".
Illustration 1 g00518158
Use Tooling (A) to remove bolts (1) .
Illustration 2 g01124793
Attach Tooling (B) and a suitable lifting device to swing drive (2). The weight of swing drive (2) is approximately 310 kg (683 lb). Install Tooling (C) .
Use Tooling (C), Tooling (B), and a suitable lifting device to remove swing drive (2) .