KIT-PILOT VALVE 1606778 - Caterpillar

Before operating this machine, read the Operator's Guide and all safety instructions.
Before operation and when operating, be sure anti-pivot link, located near lower center of machine, is disconnected and pinned to retaining plates.
No clearance for man in this area when turning vehicle.
To avoid possible weakening of this ROPS (Rollover Protective Structure), consult a Caterpillar dealer before altering this ROPS in any way.The protection offered by this ROPS will be impared if it has been structurally damaged or has been involved in an overturn incident.
General
Clean steps, grab irons and operator's compartment.Wear a hard hat, protective glasses and respirator as required by job conditions.Do not wear loose clothing or jewelry that could catch on controls.Report needed repairs.Make sure clearance flags, lights and other required warnings are on machine when roading.Know hand signals and who gives them.Do not smoke while fueling machine or when near batteries.Preparing to Operate
Clear personnel from machine and area.Clear obstacles from path of machine, note hazards such as wires and ditches.Make certain all protective guards and covers are secured in place.Adjust seat and fasten seat belt before operating.Move all bucket controls to HOLD before starting engine.Move range selector to NEUTRAL and have parking brake engaged before starting engine.Start engine in a well ventilated area.Testing Controls
Test all controls for proper operation.Test right and left steering while moving slowly.Test brakes.Test function of protective devices such as lights and back-up alarm.Operating
Do not allow riders on the machine.The operator must satisfy himself that no one will be endangered before, and while, backing the machine.Observe all gauges frequently - investigate improper readings.Listen for unusual noises.Know traffic pattern of the job and obey flagmen, road signs and signals.Know stopping distance of your machine at any given speed. Regulate travel speed accordingly.Stop machine frequently at night, walk around and inspect machine - stay alert.Match speed with job conditions - do not coast.Road machine in forward direction, not reverse.Carry bucket close to ground.Stay clear of overhangs, electric wires, slide or other dangerous areas.Use caution in crossing side hills, ridges, ditches, and other obstructions.Use caution when working on hills, banks or slopes, to avoid tipping.Stay a safe distance from edge of cliff or overhang.Report needed repairs noted during operation.Machine stability may be improved by addition of tire ballast. Machine stability may differ with the bucket being used, and the material being loaded. Consult your Caterpillar dealer for necessary information.Mounting and Dismounting
To park machine, lower bucket to ground and apply down pressure, engage parking brake and block tires if parking on a slope.Stop engine before leaving the machine.Do not jump off machine. Use steps and grab irons.Shipping
For shipping instructions consult your Caterpillar dealer.