KIT-SEAL 1724432 - Caterpillar

Secondary Steering Indicator (14) - This indicator will illuminate either red or amber. The indicator will illuminate amber when the secondary steering system is active. The indicator will illuminate red when there is a Level 1, 2, or 3 warning that is related to the secondary steering system.
High Beam (15) - This indicator will illuminate blue when the high beam headlights are ON.
Brake System Indicator (16) - This indicator will illuminate red when there is a problem with the braking system.
Operator Not Present Indicator (17) - This indicator illuminates amber when the system has determined that the operator is NOT present in the cab.
Right Blade Float (18) - This indicator will illuminate green when the right side of the blade is in FLOAT mode.
Right Turn Signal Indicator (19) - This indicator flashes green when the right turn signal is operating.Gauge Indicators
Hydraulic Oil Temperature (23) - The gauge indicates the temperature of the hydraulic oil in the hydraulic oil sump for the steering and implement circuits. If the gauge needle enters the red zone, reduce the load that is on the machine until the hydraulic oil temperature decreases.
Engine Coolant Temperature Gauge (24) - This gauge indicates the temperature of the engine coolant.
Tachometer Gauge (10) - This gauge indicates the engine speed in revolutions per minute (rpm). Table 2 indicates the engine speed that corresponds with the position of the needle on the gauge.
Table 2
Color of Zone RPM Range
White 0-2599
Amber 2600-2799
Red 2800-3000
Articulation Angle Gauge (20) - This gauge indicates that the machine is articulated to the left or to the right. Use the gauge for the articulation in order to center the machine.
Fuel Level Gauge (21) - This gauge indicates the amount of fuel that is in the fuel tank. The red range of the gauge indicates that the fuel level is below 10%. LCD Readouts
One Liquid Crystal Display (LCD) is located on the instrument cluster that will provide a digital display of various machine parameters. When the key switch is in the ON position, the displays will be illuminated in order to ensure good visibility.During normal operation, the LCD (22) will show the following data:
Machine speed
Actual gear
Hour meter or requested gearThe units can be displayed in either miles per hour or kilometers per hour. This change can be made through the Messenger monitor. When the data for a particular display is not known, all dashes will be displayed.
Machine Service Hours IconMessenger Display Module
Illustration 2 g01117622
Messenger Screen Display
(1) Back Button
(2) Left or Up Button
(3) Right or Down Button
(4) OK (Enter or Select) Button
(5) Display Menu The four buttons on the bottom of the Messenger display module are the user interface. Use the buttons for the following purposes: navigating, accessing screens for the menu and retrieving data informationBack (1) - This button is used to return to the previous screen.Left/Up (2) - This button is used for the following purposes: navigating, retrieving data information and increasing a setting value.Right/Down (3) - This button is used for the following purposes: navigating, retrieving data