KIT-GEAR PUMP 1744749 - Caterpillar

Illustration 1 g02649139
Dimensions for the insert (N) Outside diameter (P) Thickness of the insert (R) Wall thickness of the insert (S) Radius on insert
Table 1
Dimensions for the Liner Seat Insert    
Part Number     Outside Diameter (N) (4)     Thickness of the Insert (P)     Wall Thickness of the Insert (R)     Radius (S)    
353-5617
120-4334 (1) (2)    
212.115 0.013 mm (8.3510 0.0005 inch)    
5.080 0.025 mm (0.2000 0.0010 inch)    
6.528 0.032 mm (0.2570 0.0013 inch)    
0.90 0.13 mm (0.035 0.005 inch) by 30 degrees    
353-5618
120-4337 (1) (2)    
7.620 0.025 mm (0.3000 0.0010 inch)
335-8971 (3)    
212.370 0.013 mm (8.3610 0.0005 inch)    
6.655 0.032 mm (0.2620 0.0013 inch)
( 4 ) Do not measure this dimension
( 1 ) Canceled
( 2 ) Non-chamfered insert
( 3 ) Oversize