KIT-SEAL 1778847 - Caterpillar

Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
Illustration 1 g06126379
View showing wiper arm folded down on service platform
For service purposes the front glass wiper arm can be folded down away from the front glass and placed on the maintenance platform.If the wiper arm is not returned to the operation position, the wiper motor shaft and/or wiper arm can be damaged during machine articulation.
Illustration 2 g06126384
View showing broken wiper arm and broken wiper motor shaft (after not being returned back to the operation position before machine articulation)
The wiper arm can get caught between the maintenance platform and lift arms, damaging the wiper motor shaft and wiper arms.Solution
Table 1
Required Parts
Item Qty Part Number Description
1 1 373-2414 Window Wiper Arm Gp
(for use with all wiper motors)
2 1 416-0005 Window Wiper Motor Gp
(for bonded front glass, LH park)
3 1 423-4217 Window Wiper Motor Gp
(for zip-in front glass, LH park) Caterpillar is aware of this problem, and an interim repair has been defined. Replace the broken part with the same part number.To avoid damage after maintenance, always return the front glass wiper arm to the operating position against the front glass.