KIT-VALVE REPAIR 1917607 - Caterpillar

Personal injury or death can result from the bucket falling.Block the bucket before changing bucket tips.
Illustration 1 g00101352
(1) This tip is usable. (2) This tip should be replaced. (3) This tip has been overworn.
Check the bucket tips for wear. If the bucket tip has a hole, replace the bucket tip.
Illustration 2 g01272671
Drive the pin out of the bucket tip from the retainer side of the bucket tip. Remove the bucket tip and the retainer.
Illustration 3 g01272854
(1) Retaining washer
(2) Retainer
(3) Adapter
Clean the adapter and the pin.
Fit retainer (2) into retaining washer (1). Install this assembly into the groove that is in the side of adapter (3).
Illustration 4 g01272859
Install the new bucket tip or the rotated bucket tip onto the adapter. To allow greater penetration or less penetration, the bucket tip may be rotated by 180 degrees.
From the other side of the retainer, drive the pin through the bucket tip, the adapter, and the retainer.
After you drive the pin, make sure that the retainer fits snugly into the pin groove.