KIT-VALVE 1977484 - Caterpillar

Start-Up Of The Service Mode
Illustration 3 g00685772
Monitor Panel (7) "Up" key (8) "Left" key (9) "Right" key (10) "Down" key (11) "Cancel" key (12) "Setting" key (13) "Menu" key (14) "OK" keyThe keys of the keypad are used to enter the service mode. The keys are used to change the modes. Next, the appropriate key is pressed until the desired mode is displayed on the message center."Up" key and "Down" key
The "up" key (7) is used and the "down" key (10) is used to scroll up and down through the items in the message area."Left" key and "Right" key
The "left" key (8) is used and the "right" key (9) is used to scroll to the left and to the right through the items in the message area."Setting" key
The "setting" key (12) is used to set the menu that is being displayed in the message area."Menu" key
The "menu" key (13) is used to access the main menu."Cancel" key
The "cancel" key (11) is used to cancel the immediate selection and the key is used to exit the menu screen. The screen of normal operation will be displayed when the "cancel" key is pressed during the menu screen."OK" key
The "OK" key (14) is used to select the item that is being highlighted in the message area.Start-Up Of The Service Mode
Illustration 4 g00687262
The above screen should be displayed. Then, press the "menu" key (13).
Illustration 5 g00687282
The "down" key should be pressed. Highlight the "PREFERENCES" setting. Press the "OK" key.
Illustration 6 g00764425
The above screen should be displayed.
Illustration 7 g00687296
Illustration 8 g00687300
The keys for direction are used to input the password. Input the password and press the "OK" key.
Illustration 9 g00776428
Typical example of a displayThe above screen should be displayed if the correct password is entered.
Illustration 10 g00687326
The above screen should be displayed if the password that was entered is not correct. 315C Start Mode
Start the service function by using: up key, down key, left key and right key Exiting The Service Mode
Two methods are capable of terminating the service mode.
The service mode will be terminated 10 seconds after the start switch is turned to the OFF position.
Illustration 11 g00687339
Highlight "SERVICE" in the first line of the display.
Illustration 12 g00687350
The "left" key and the "right" key is used to scroll through the display. The display should show "EXIT" in the first line.
Illustration 13 g00687262
The service mode will be terminated and the display will return to the above display when the "setting" key is pressed at the "exit" screen.