KIT-PUMP 1996763 - Caterpillar

Illustration 1 g06237712
(1) Relays (Compressor and Blower Motor)Note: The two relays (1) for the compressor and blower motor are identical. To determine which relay is for which component, identify the color variations of the wires on each of the relay connectors.Compressor Relay
Illustration 2 g06244128
Compressor Relay Diagram
(B) ConnectorA relay is used to control the clutch on the refrigerant compressor. The compressor relay is turned ON/OFF by receiving a ON/OFF signal thermally controlled at the control module.Blower Motor Relay
Illustration 3 g06244133
Blower Motor Relay Diagram
(C) ConnectorA relay is used to control the power to the fan control for the blower motor. The blower motor relay is turned ON with a signal from the control module. Power voltage is supplied to the blower motor through the fan control.Relay Specifications
Illustration 4 g06244851Rated Voltage ... 24 VDCRated Coil Current ( 20° C (68° F)) ... 0.063A 0.01ARated Current (NB Side) ... 0.1A TO 16ARated Current (NC Side) ... 0.1A TO 10ANote: Use caution, there is a polarity in the coil side of the relay.Check the continuity between terminals (3) and (5) under the following conditions. When 20 VDC to 30 VDC is applied between terminals (1) and (2), continuity exists between terminals (3) and (5). When no voltage is applied between (1) and (2), continuity does not exist between terminals (3) and (5).