KIT-SEAL 2003315 - Caterpillar

Removal Procedure
Start By:
Remove the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant into a suitable container for storage or for disposal. Refer to the Operation and Maintenance Manual, "Refill Capacities".
Illustration 1 g00603899
Remove tube assemblies (1) and brackets (2).
Illustration 2 g00603902
Remove bolts (3) and (5) in order to remove adapter (4) and tube (6).
Illustration 3 g00603903
Remove bolts (7) in order to disconnect elbow (8) from the engine oil pump.
Illustration 4 g00603905
The weight of the engine oil pump is approximately 39 kg (86 lb). Use two people in order to remove the engine oil pump. Remove bolts (9) in order to remove engine oil pump (10) and adapter (11).