KIT-LEVER 2031097 - Caterpillar

Illustration 3 g02508677
If the DCU engine panel is reading generator parameters from the RIO 425, then the generator image and values will be displayed here.Refer to the following list for the displayed values:
Individual phase currents
Phase-Phase voltages
Phase-Neutral voltages
Frequency (Hz)
Total power (kW)
Cosinus (decimal value)Languages
Illustration 4 g02508696
Select the desired RP410 operator language.Note: The instruments text description resides in the DCU, and must be translated for each language during installation of the DCU.If a language is selected where there is no translation, the default language will be used.Counters
The counters page displays engine running hours for all the engines.Information
Illustration 5 g02508756
The counters page displays IP addresses and revision numbers.The DCU section displays the IP address of the connected engine panels.Configuration
The configuration menu selection leads to the user configuration submenu section. The configuration menu is not password protected.Configuration Selections
Wallpaper
Illustration 6 g02508796
The wallpaper is the background image for the instrument screens.Predefined Wallpapers
Select appropriate background wallpaper from the selection of available wallpapers.Up to eight wallpaper backgrounds may come with the unit.Personal Wallpaper
Personal wallpaper can be uploaded using the web interface.
Connect a standard Ethernet cable between the RP410 and your PC.
In the PC browser, type the IP address of the RP410, as found in the RP410 submenu.
Select "Upload Wallpaper".
Using the "Browse" button, select a picture file from your PC in PNG format. Select the size 640x416 pixels. Maximum file size is 1MB.
Select the "Upload" button.Button Beep
The button beep selection allows the user to decided whether a button press and a tap on the touch screen should activate the buzzer.The function toggles on/off.Sound Configuration
The RP410 has a pair of speakers and a buzzer built-in. Use the sound configuration selection to choose between the buzzer or the sounds that are programmed from the factory. The sound will be heard through the speakers.The speaker sound is also available on the 3.5 mm standard mini-jack output on the panel rear. The 3.5 mm standard mini-jack is for connection to external speakers such as typical speakers for a PC. Home Page Layout
The home page is accessed by pressing the "Home" button. The home page is the top level in the instrument hierarchy.The home page can use the entire area of the screen for instruments or be divided into two or four quadrants. Each quadrant houses instruments for other engines.Example
Illustration 7 g02508806
If there are three engines connected to the RP410, you can choose the layouts that are shown in Illustration 7.Single
If the single screen is selected, pressing the "Home" button will display the engine with the lowest IP number.The "Previous" and "Next" buttons provide access to all other engines.Dual
If "Dual" is selected, the screen is divided in two halves. The left pane displays engine #1, and the right pane displays engine #2.The "Previous" and "Next" buttons provide access to all other engines.Quad
If "Quad" is selected, the screen is divided into four quadrants. The top left quadrant displays engine #1, the top right quadrant displays engine #2, and the bottom left quadrant displays engine #3.Note: If there are 5-8 engines installed, the "Previous" and "Next" buttons are used to