KIT-AIR INFLATION 2079269 - Caterpillar

Illustration 1 g01967256
Illustration 2 g01967257
The basic machine specifications are listed below.
Table 1
D7R Track-Type Tractor    
Weight without Implements    
20500 kg (45500 lb)    
Weight with 7SU Bulldozer    
24200 kg (53350 lb)    
Weight with 7SU Bulldozer and Ripper    
27230 kg (60000 lb)    
Maximum Overall Height (A)    
3.53 m (11 ft 7 inch)    
Maximum Overall Length (B) (2)    
6.23 m (20 ft 5 inch)    
Maximum Overall Width (C) (1)    
4.50 m (14 ft 9 inch)    
( 2 ) This length includes the blade and the ripper.
( 1 ) This width is measured across the widest blade.
Table 2
D7R LGP Track-Type Tractor    
Weight without Implements    
20500 kg (45500 lb)    
Weight with 7S Bulldozer    
24250 kg (53400 lb)    
Maximum Overall Height (A)    
3.52 kg (11 ft 9 inch)    
Maximum Overall Length (B) (2)    
6.32 m (20 ft 9 inch)    
Maximum Overall Width (C) (1)    
4.55 m (14 ft 11 inch)    
( 2 ) This length includes the blade and the ripper.
( 1 ) This width is measured across the widest blade.
Table 3
D7R XR Track-Type Tractor    
Weight without Implements    
20500 kg (45500 lb)    
Weight with 7SU Bulldozer    
24200 kg (53350 lb)    
Weight with 7SU Bulldozer and Ripper    
27230 kg (60000 lb)    
Maximum Overall Height (A)    
3.53 m (11 ft 7 inch)    
Maximum Overall Length (B) (2)    
6.35 m (20 ft 10 inch)    
Maximum Overall Width (C) (1)    
4.50 m (14 ft 9 inch)    
( 2 ) This length includes the blade and the ripper.
( 1 ) This width is measured across the widest blade.Intended Use
This Track-Type Tractor is a machine for high production earthmoving that is described by "ISO 6165:2001". The Track-Type Tractor is classified as a Tractor-dozer. The tractor-dozer is a self-propelled crawler with equipment such as a dozing attachment which cuts, moves and grades material through forward motion of the machine or a mounted attachment that is used to exert a push or a pull force such as a ripper or towing winch. Additional applications include pushing scrapers during loading and pulling towed equipment when the drawbar is used.Application/Configuration Restrictions
Maximum approved Operating Weight is 34900 kg (76780 lb).Maximum drawbar pull 48000 kg (105822 lb)Maximum vertical drawbar load 24000 kg (52911 lb)The maximum line pull for the winch is 489304 N (110000 lb).The maximum slope that has the proper lubrication is 100 percent or 45 degrees.The capability of the brake is equal to the ROPS capability under a 45 degree slope.Use the machine only in environments that are not explosive with gases. Special attachments and operating instructions are required for waste handling applications and other custom configurations.