KIT-SEAL 2082646 - Caterpillar

Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin.
Operate the machine until the oil is warm.Park the machine on a level surface with front wheels straight ahead. Lower all attachments to the ground. Apply a slight downward pressure to the attachments. Center the articulation of the machine and install the frame lock pin. The frame lock pin must move freely in the frame. Move the front wheels to vertical and install the wheel lean bolt. Engage the parking brake. Stop the engine.Check the all wheel drive oillevel by opening the oil filler plug. The oil filler plug is located on the front wheel of the machine. There is an oil filler plug on each front wheel of the machine.
Illustration 1 g01360462Note: Position the wheel so the oil check plug (1) is at the nine o'clock position.
Clean the area around the all wheel drive oil check plug of any dirt or debris. This must be done before the all wheel drive oil check plug can be removed.
Open the oil check plug (1).
Maintain the oil level even with the oil check plug (1).
If necessary, add oil through the oil fill/drain plug (2) opening.
Clean the oil check plug and install the oil check plug.