KIT-ENGINE OVERHAUL 20R0639 - Caterpillar

(1) Apply 9S-3263 Thread Lock on threads of bolt. Torque for bolt ... 313.5 19.5 N m (230 15 lb ft)Use appropriate thickness spacers (2) and (3) to get a bearing rolling torque of 6.03 2.6 N m (4.44 1.9 lb ft). This adjustment should be done without oil seal (6).(2) Spacer thickness: 102-6472 ... 85.8 mm (3.38 in)102-6473 ... 86.1 mm (3.39 in)102-6474 ... 86.4 mm (3.40 in)102-6475 ... 86.7 mm (3.41 in)(3) Spacer thickness: 102-6477 ... 9.800 mm (.3858 in)102-6478 ... 9.850 mm (.3878 in)102-6479 ... 9.900 mm (.3898 in)102-6480 ... 9.950 mm (.3917 in)102-6481 ... 10.000 mm (.3937 in)102-6482 ... 10.025 mm (.3947 in)102-6483 ... 10.050 mm (.3957 in)102-6484 ... 10.075 mm (.3967 in)102-6485 ... 10.100 mm (.3976 in)102-6486 ... 10.125 mm (.3986 in)102-6487 ... 10.150 mm (.3996 in)102-6488 ... 10.175 mm (.4006 in)102-6489 ... 10.200 mm (.4016 in)102-6490 ... 10.225 mm (.4026 in)102-6491 ... 10.250 mm (.4035 in)102-6492 ... 10.275 mm (.4045 in)102-6493 ... 10.300 mm (.4055 in)(4) Apply 1U-8846 Gasket Maker on mating surfaces of cage and housing. Apply 5P-3413 Sealant on the inner surface of cage where seal (6) installs.(5) Apply 9S-3263 Thread Lock on threads of bolts. Torque for bolts ... 33.3 3 N m (24 2 lb ft)(6) Lubricate the seal lip with a small amount of grease being sealed.(7) Apply 5P-3931 Anti-Seize Compound to the splines of carrier and shaft before installation of carrier.