KIT-CAMSHAFT 20R2354 - Caterpillar

Illustration 2 g06024336
458-8261 Pump Lines Gp
Installation Procedure
Illustration 3 g06024401
Valve Assembly (A)
( 3) 310-0165 Control Valve Gp
(5) 366-0797 Support
(6) 366-0837 Support As
(9) 101-7198 Adapter
(11) 148-8340 Connector As
(12) 148-8347 Elbow As
(13) 153-6242 Connector As
(14) 164-5567 Quick Disconnect Coupler As
(19) 4K-1388 O-Ring Seal
(22) 6V-0852 Dust Cap
(24) 8T-4121 Hard Washer
(26) 8T-4184 Bolt
(27) 8T-4196 Bolt
(28) 8T-4223 Hard Washer
(30) 8T-4956 Bolt
Assemble the valve onto the supports.
Illustration 4 g06024378
(A) Assembled Valve
Install valve assembly (A) onto the frame.
Illustration 5 g06024387
(7) 464-7245 Hose As
(8) 464-7248 Hose As
Connect hoses (7) and (8) to the valve.
Illustration 6 g06024440
(7) 464-7245 Hose As
(8) 464-7248 Hose As
(10) 148-8327 Connector As
Connect hose (7) to the drain tube.
Illustration 7 g06024406
(1) 346-3390 Flange
(2) 296-7058 Elbow As
(4) 333-7149 Hose As
(8) 464-7248 Hose As
(16) 1P-4578 Half Flange
(17) 228-4710 Spacer
(18) 4J-0522 O-Ring Seal
(20) 5P-7468 Clip
(21) 5P-7469 Clip
(23) 6V-1874 Grommet
(24) 8T-4121 Hard Washer
(25) 8T-4183 Bolt
(28) 8T-4223 Hard Washer
(29) 8T-4910 Bolt
(31) 8T-5005 Bolt
Connect hose (8) to the pump pressure port.
Secure hose (8) with supplied hardware.
Connect hose (4) to the pump drain and the drain tube.
Unless specified, tighten all fittings and hardware to standard torque.
Check for leaks.