KIT-SEAL 2102760 - Caterpillar

Illustration 1 g01675896
Click the "Config" soft key.
Scroll to "Calibrate Sensors" and highlight "Calibrate Sensors". Click the "OK" button. The "Calibrate Sensors" dialog will appear.
Illustration 2 g01675873
Highlight "Blade Pitch Sensor".
Illustration 3 g01675874
Click the "OK" button. The "Calibrate Pitch Sensor" dialog will appear.
Illustration 4 g01675894
Use a level in order to ensure that the mast that the blade pitch sensor is mounted on is vertical. Follow the instructions on the "Calibrate Pitch Sensor" dialog. The sensor will calibrate. Refer to Illustration 5.
Illustration 5 g01675934
After the sensor has calibrated, the display will return to the "Calibrate Sensors" dialog. Click the "Escape" button in order to return to the "Setup Menu - Configuration" dialog.
Illustration 6 g01751919
Go to the "Blade Roll" menu item under the "Configuration" menu in order to enable the use of Blade Roll. Select "Yes" in order to allow blade roll.