KIT-FAN BLADE 2169992 - Caterpillar

Table 53
           
    REVERSE FAN        
    ERROR        
           
    -HYD OIL TEMP HIGH        
           
           
           
           Typical example of an error message for the reverse fan functionReverse Fan Function Will Not Start
The monitor will provide one of the following error messages if the reverse fan function does not start:"NOT INSTALLED" - The reverse fan is not installed on this machine. If this message is received in error, consult your Caterpillar dealer."HYD OIL TEMP HIGH" - The hydraulic oil temperature is too high. Shut off the engine and do not operate the machine until the hydraulic oil temperature is below 85 °C (185 °F)."COOLANT TEMP HIGH" - The coolant temperature is too high. Shut off the engine and do not operate the machine until the coolant temperature is below 95 °C (203 °F)."HYD LOCK SW OFF" - The hydraulic lockout control is in the UNLOCKED position. Move the hydraulic lockout control to the LOCKED position."SOL MALFUNCTION" - The reverse fan is malfunctioning. Consult your Caterpillar dealer.Reverse Fan Function Is Interrupted
If one of the following conditions occur, the reverse fan function will stop, and regular operation of the radiator cooling fan will resume:
The hydraulic lockout control is moved to the UNLOCKED position.
The temperature of the hydraulic oil rises above 90 °C (194 °F).
The coolant temperature rises above 100 °C (212 °F).This event will be accompanied by a "REVERSE FAN ERROR" message.Filter and Fluid Information
The "FLTR/FLUID INFO" menu allows the operator to change the accumulated hours for the machine's filters and fluids.
Press the menu key.
Table 54
                               
    MAIN MENU        
                               
    SERVICE        
                               
                               
                               
                               
                               
Press the right key or press the left key in order to highlight the "SERVICE" menu. Press the OK key.Note: You will be prompted to enter a password. Refer to "Password Entry" for information on entering a password.
Table 55
           
    SERVICE        
    MAINTENANCE        
    PASSWORD CHANGE        
           
           
           
           
           
After the password has been entered successfully, press the up key or