KIT - BEARING 2184365 - Caterpillar

The ends of the bellows are very sharp. Injury could occur if the bellows are not handled properly. Handle the bellows by the convolutions.
The alignment of the bellows is important. Improper alignment may lead to premature failure of the bellows. Misalignment can be identified by visually inspecting the convolutions for uniformity of compression.Inspect the bellows for damage prior to installation. If there is any damage to the convolutions, discard the bellows. Minor damage to the ends of the bellows may be repaired. However, if there is any difficulty in installation after the repair, discard the bellows.
Illustration 1 g03367443
Table 1
Specification for 126-0081 Air Lines Gp
Item Qty Part Specification Description
1 1 217-8946 Elbow Install the elbow pointing straight towards the front of the engine.
2 1 127-0929 Clamp Torque to 8.5 2.0 N m (75.2 17.7 lb in).