KIT-SWITCH 2203376 - Caterpillar

Remove four bolts (12) and the washers.
Illustration 7 g00367038
Fasten Tooling (A) to the filter, as shown. Use a suitable lifting device to support the filter. Remove mounting bolts (13) and the washers.
Carefully remove the filter from the machine. The weight of the filter is approximately 22 kg (49 lb) .Note: This ends the procedure for the removal of the hydraulic oil filter. The following steps deal with the removal of the hydraulic oil tank.
Drain the oil from the hydraulic tank into a suitable container. The capacity of the hydraulic tank is 105 L (27.7 US gal) .
Illustration 8 g00492280
Remove two bolts (14) and the washers that secure plate (15) . Remove plate (15) .
Illustration 9 g00492281
Remove two bolts (16) from support (18) .
Remove three bolts (17) that secure support (18) to the machine. Remove support (18) .
Illustration 10 g00492282
Remove two bolts (19) and the washers that secure cover (20) to the machine. Remove cover (20) .
Illustration 11 g00492283
Remove bolts (21) and the washers that secure the side cover.
Illustration 12 g00492284
Remove three bolts (22) and the washers that secure side cover (23) . Remove side cover (23) .
Illustration 13 g00492285
Remove two bolts (25) , and loosen two bolts (24) that secure plate (26) to the frame. Remove plate (26) .
Open the left hand access door.
Illustration 14 g00492286
Remove two electrical connectors (27) from the side of the hydraulic tank.
Remove two hose assemblies (28) and (29) from the side of the hydraulic tank.
Illustration 15 g00492287
Loosen two hose clamps (30) , and remove hose (31) from the hydraulic tank.
Illustration 16 g00492288
Disconnect electrical connector (32) . Remove three tie-wraps (33) from the side of the hydraulic tank.
Illustration 17 g00492289
Remove bolt (34) and the washer that secures clamp (35) to the side of the hydraulic tank.
Illustration 18 g00492290
Remove six bolts (36) and the washers that secure that hydraulic tank to the frame.
Illustration 19 g00492291
Attach Tooling (B) to the hydraulic tank, as shown. Use a suitable lifting device to remove the hydraulic tank from the machine. The weight of the hydraulic tank is approximately 145 kg (320 lb) .