KIT - GASKET 2229154 - Caterpillar

Illustration 1 g00883362
Remove bolts (2) and cover (3) from tilt and tip cylinder (1). Attach a suitable lifting device to tilt and tip cylinder (1). The weight of the tilt and tip cylinder is approximately 93 kg (205 lb).
Illustration 2 g00883363
Remove hose assemblies (4).
Illustration 3 g00883364
Remove nuts (7), bolts (8), caps (5), and shims (6).
Illustration 4 g01083105
Remove bolts (9) and retainer (10). Remove pin (11).
Remove tilt and tip cylinder (1) from the machine. Disassembly and Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 152-4252 Hydraulic Cylinder Repair Stand 1
1P-1833 Bearing Puller Adapter 1
9U-6833 Nut 1
4C-9633 Puller Stud 1
6V-3160 Double Acting Cylinder 1
9S-5565 Pin Puller Sleeve As 1
B 1P-0520 Driver Gp 1
C 2P-8301 Seal Guide 1
D - LOCTITE 1
E 5P-0960 Molybdenum Grease 1
Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed.Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death.Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder.
Installation Procedure
Illustration 5 g01083105
Install a suitable lifting device to tilt and tip cylinder (1) and position tilt and tip cylinder (1) on the machine. The weight of the tilt and tip cylinder is 93 kg (205 lb).
Install pin (11), retainer (10), and bolts (9). Tighten the bolts to a torque of 700 90 N m (516 66 lb ft).
Illustration 6 g00883364
Install caps (5), shims (6), nuts (7), and bolts (8). Tighten the bolts to a torque of 700 90 N m (516 66 lb ft).
Illustration 7 g00883363
Install hose assemblies (4).
Illustration 8 g00883362
Install cover (3) and bolts (2) to tilt and tip cylinder (1).