KIT-GASKET-RS 2243973 - Caterpillar

Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed. The user is responsible for the performance of maintenance, including all adjustments, the use of proper lubricants, fluids, and filters. The user is also responsible for the replacement of components due to normal wear and aging. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components. Use fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance. Before each consecutive interval is performed, all maintenance from the previous interval must be performed.When Required
Battery or Battery Cable - Disconnect
Catalyst (SCR) - Replace
Coolant Sample (Level 1) - Obtain
Coolant Temperature Regulator - Replace
Diesel Exhaust Fluid Pump - Replace
Engine Air Cleaner Element (Single Element) - Inspect/Replace
Engine Oil and Filter - Change
Fuel System - Prime
Heat Exchanger - Inspect
Overhaul Recommendations
Sea Water Strainer - Clean/Inspect
Zinc Rods - Inspect/Replace
Daily
Air Tank Moisture and Sediment - Drain
Battery - Replace
Control Panel - Inspect/Test
Coolant Level - Check
Engine Oil Filter Differential Pressure - Check
Engine Oil Level - Check
Fuel System Primary Filter/Water Separator - Drain
Fuel Tank Water and Sediment - Drain
Walk-Around Inspection
Initial 250 Service Hours
Engine Speed/Timing Sensor - Clean/Inspect
Engine Valve Lash - Check
Fuel Injector - Inspect/Adjust
Every 250 Service Hours or Monthly
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Battery Electrolyte Level - Check
Belts - Inspect/Adjust/Replace
Coolant Sample (Level 1) - Obtain
Engine Oil Sample - Obtain
Hoses and Clamps - Inspect/Replace
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
Coolant Sample (Level 2) - Obtain
Fuel Filter Differential Pressure - Check
Initial 500 Service Hours or 6 Months
Filter Screen (Air) - Inspect/Clean
Filter Screen (DEF) - Inspect/Clean
Every 1000 Service Hours
Engine - Clean
Engine Crankcase Breather - Clean
Engine Protective Devices - Check
Fuel System Secondary Filter - Replace
Every 6 Months
Oil Mist Detector - Clean
Every 2000 Service Hours
Crankshaft Vibration Damper - Inspect
Driven Equipment - Check
Engine Mounts - Inspect
Fumes Disposal Filter Element - Replace
Turbocharger - Inspect
Every 2500 Service Hours
Engine Valve Lash - Check
Fuel Injector - Inspect/Adjust
Every Year
Coolant Sample (Level 2) - Obtain
Every 4000 Service Hours
Auxiliary Water Pump - Inspect
Fuel Filter Differential Pressure - Check
Every 4500 Service Hours or Yearly
Diesel Exhaust Fluid Nozzle - Inspect/Clean
Filter Screen (Air) - Inspect/Clean
Filter Screen (DEF) - I