2271199 KIT-SEAL Caterpillar parts
420E, 422E, 424B, 428E, 430E, 432E, 434E, 442E, 444E, 450E, 450F, 928HZ, 930G, 953D, D5R LGP, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, D6N, D6N LGP, TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B...
Rating:
Alternative (cross code) number:
CA2271199
227-1199
2271199
CA2271199
227-1199
2271199
Weight: 0.01 pounds 0 kg.
BACKHOE LOADER, WHEEL LOADER,
This part in 2 request:
Show.
This information for suppliers only!
2025-05-13
2023-01-14
Compatible equipment models: 2271199:
Information:
Remove Crankshaft Rear Seal And Wear Sleeve
Start By:a. remove flywheel
The crankshaft rear seal and wear sleeve come as a set and must be installed as a set. If a replacement of the seal is to be made, a replacement of the wear sleeve must also be made.
1. Make at least three holes in seal (1) with a hammer and a sharp punch.2. Use tool (A) to remove seal (1). 3. Install tool (C) in the seal bore.4. Install tool (B) between tool(C) and wear sleeve (2). Turn tool (B) until the tool makes a dent (crease) in wear sleeve (2). Do this in three or more places until the wear sleeve is loose.5. Remove tools (B) and (C), then remove wear sleeve (2) from the crankshaft.Install Crankshaft Rear Seal And Wear Sleeve
1. Install the rear seal and wear sleeve with tooling (D). Use the procedures which follows: a. Clean and make a preparation of the wear sleeve inside diameter and crankshaft outside diameter with 6V1541 Quick Cure Primer. Make an application of 9S3265 Retaining Compound to the crankshaft outside diameter before the wear sleeve is installed on the crankshaft. Do not let any Quick Cure Primer or Retaining Compound get on the lip of the seal.b. Install locator (3) and the bolts on crankshaft (4).c. The seal and wear sleeve must be installed dry. Make sure the seal is installed with the part number and the arrows showing crankshaft rotation toward the outside.
The front and rear seals and wear sleeves have different spiral grooves in the seal. Because of this type of design, the front seal group for an engine is different from the rear seal group. If a seal group is installed on the wrong end of the engine, oil can actually be taken out of the engine instead of moving the oil back into the engine.
d. Put wear sleeve (2) and seal (7) as a unit in position on locator (3).e. Pit installer (5) in position on locator (3).f. Put clean engine oil on the face of nut (6) and its contact area on installer (5). Install nut (6) on locator (3).g. Tighten nut (6) until installer (5) makes contact with locator (3).h. Remove tooling (D) from the crankshaft seal and wear sleeve to the correct depth on the crankshaft.End By:a. install flywheel
Start By:a. remove flywheel
The crankshaft rear seal and wear sleeve come as a set and must be installed as a set. If a replacement of the seal is to be made, a replacement of the wear sleeve must also be made.
1. Make at least three holes in seal (1) with a hammer and a sharp punch.2. Use tool (A) to remove seal (1). 3. Install tool (C) in the seal bore.4. Install tool (B) between tool(C) and wear sleeve (2). Turn tool (B) until the tool makes a dent (crease) in wear sleeve (2). Do this in three or more places until the wear sleeve is loose.5. Remove tools (B) and (C), then remove wear sleeve (2) from the crankshaft.Install Crankshaft Rear Seal And Wear Sleeve
1. Install the rear seal and wear sleeve with tooling (D). Use the procedures which follows: a. Clean and make a preparation of the wear sleeve inside diameter and crankshaft outside diameter with 6V1541 Quick Cure Primer. Make an application of 9S3265 Retaining Compound to the crankshaft outside diameter before the wear sleeve is installed on the crankshaft. Do not let any Quick Cure Primer or Retaining Compound get on the lip of the seal.b. Install locator (3) and the bolts on crankshaft (4).c. The seal and wear sleeve must be installed dry. Make sure the seal is installed with the part number and the arrows showing crankshaft rotation toward the outside.
The front and rear seals and wear sleeves have different spiral grooves in the seal. Because of this type of design, the front seal group for an engine is different from the rear seal group. If a seal group is installed on the wrong end of the engine, oil can actually be taken out of the engine instead of moving the oil back into the engine.
d. Put wear sleeve (2) and seal (7) as a unit in position on locator (3).e. Pit installer (5) in position on locator (3).f. Put clean engine oil on the face of nut (6) and its contact area on installer (5). Install nut (6) on locator (3).g. Tighten nut (6) until installer (5) makes contact with locator (3).h. Remove tooling (D) from the crankshaft seal and wear sleeve to the correct depth on the crankshaft.End By:a. install flywheel
Cat SIS web machinery list:
Parts kit Caterpillar catalog:
2767388
KIT-BEARING
120M, 12M, 2470C, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, AP-600D, AP-655D, BG600D, BG655D, C6.6, C7.1, CP-56, CP-64, CP-76, CS-56, CS-56B,...
120M, 12M, 2470C, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, AP-600D, AP-655D, BG600D, BG655D, C6.6, C7.1, CP-56, CP-64, CP-76, CS-56, CS-56B,...
2767389
KIT-BEARING
120M, 12M, 2470C, 329E, 329E LN, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, AP-600D, AP-655D, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS-64, CS-74, CS-74B, CS-78B, D5R LG...
120M, 12M, 2470C, 329E, 329E LN, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, AP-600D, AP-655D, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS-64, CS-74, CS-74B, CS-78B, D5R LG...
3802062
KIT-PISTON
120M, 12M, 2470C, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, AP-600D, AP-655D, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS-64, CS-68B, CS-74, CS-74B, CS-78B, D5R LGP, D6K,...
120M, 12M, 2470C, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, AP-600D, AP-655D, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS-64, CS-68B, CS-74, CS-74B, CS-78B, D5R LGP, D6K,...
8Y6860
KIT-SPRING
120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H,...
120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H,...
2618566
KIT-HYD CYLINDER SEAL
525C, 535C, 545C, D6M, D6N
525C, 535C, 545C, D6M, D6N
2422542
KIT-SEAL
621E, 621F, 621G, 621H, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627E, 627F, 627G, 627H, 785B, 785C, 785D, D6K LGP, D6N, D6R III, D6T
621E, 621F, 621G, 621H, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627E, 627F, 627G, 627H, 785B, 785C, 785D, D6K LGP, D6N, D6R III, D6T
2339204
KIT-SEAL
120G, 120H, 120H ES, 120H NA, 120K, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140M, 140M 2, 140M 3, 140M 3 AWD...
120G, 120H, 120H ES, 120H NA, 120K, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140M, 140M 2, 140M 3, 140M 3 AWD...
1934640
KIT-SPIDER & BEARING
924F, 924G, 924GZ, 924H, 924HZ, 924K, 928G, 928H, 928HZ, 930G, 930K, 938H, 938K, IT24F, IT28G, IT38H
924F, 924G, 924GZ, 924H, 924HZ, 924K, 928G, 928H, 928HZ, 930G, 930K, 938H, 938K, IT24F, IT28G, IT38H
1597457
KIT-THIN DISC
924K, 928G, 928HZ, 930G, 930K, IT28F, IT28G
924K, 928G, 928HZ, 930G, 930K, IT28F, IT28G
1177799
KIT-SEAL
120M, 12M, 140M, 140M 2, 14M, 160M, 160M 2, 16M, 24H, 24M, 525B, 525C, 535B, 535C, 545, 545C, 814F, 814F II, 815F, 815F II, 816F, 816F II, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 8...
120M, 12M, 140M, 140M 2, 14M, 160M, 160M 2, 16M, 24H, 24M, 525B, 525C, 535B, 535C, 545, 545C, 814F, 814F II, 815F, 815F II, 816F, 816F II, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 8...
1864382
KIT-SEAL
928G, 928HZ, IT28G
928G, 928HZ, IT28G
2861075
KIT-SEAL
928HZ, 930G
928HZ, 930G
2271194
KIT-VALVE
420E, 430E, 432E, 434E, 442E, 444E, TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
420E, 430E, 432E, 434E, 442E, 444E, TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
2271193
KIT-VALVE
420E, 430E, 432E, 434E, 442E, 444E, TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
420E, 430E, 432E, 434E, 442E, 444E, TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
2271192
KIT-VALVE
420E, 430E, 432E, 434E, 442E, 444E, 450E, D5R LGP, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, D6N, D6N LGP, TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
420E, 430E, 432E, 434E, 442E, 444E, 450E, D5R LGP, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, D6N, D6N LGP, TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
2237885
KIT-SEAL
TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
2238061
KIT-CONTROL
TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
2238232
KIT-BEARING
TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
1105056
KIT-SEAT
307B, 311B, 312B L, 315B L, 317B LN, 318B, 320B, 320B L, 325B, 345B II, 365B, 365B II, 365B L, 385B, 814F, 814F II, 815F, 815F II, 816F, 816F II, 902, 906, 906H, 906H2, 907H, 907H2, 908, 908H, 908H2, ...
307B, 311B, 312B L, 315B L, 317B LN, 318B, 320B, 320B L, 325B, 345B II, 365B, 365B II, 365B L, 385B, 814F, 814F II, 815F, 815F II, 816F, 816F II, 902, 906, 906H, 906H2, 907H, 907H2, 908, 908H, 908H2, ...
2621857
KIT-SEAL
432E, 434E, 442E, 444E, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
432E, 434E, 442E, 444E, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
2165967
KIT-SEAL
TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
2575571
KIT-COVER
420E, 430E, 432E, 434E, 442E, 444E, 450E, 450F, TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
420E, 430E, 432E, 434E, 442E, 444E, 450E, 450F, TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
2575572
KIT-COVER
TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
2271201
KIT-FASTENER
D5R LGP, D6K LGP, D6K XL, D6K2, D6K2 LGP, D6N, D6N LGP, TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
D5R LGP, D6K LGP, D6K XL, D6K2, D6K2 LGP, D6N, D6N LGP, TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B