KIT-FINAL DRIVE BEARING 2276125 - Caterpillar

Illustration 1 g00517046
(1) Rubber toric sealNote: Rubber toric seals and all of the surfaces in contact with the rubber toric seals must be clean and dry at assembly. Prior to installation, put a thin layer of oil on the surfaces of the metal seals that are in contact. Put lubricant on all other seals at assembly. (2) Nuts Quantity ... 12 Final torque ... 1210 55 N m (892 40 lb ft)Note: Apply 2P-2506 Thread Compound to the washer face and threads of nuts (2) . (3) Bolts Quantity ... 6 Final torque ... 250 14 N m (185 10 lb ft)Note: Perform the procedure in the Steering System Testing and Adjusting, "Front Wheel Bearing - Adjust" before you install these bolts. Apply 9S-3263 Thread Lock Compound to the treads of the bolts (3) after the bearing adjustment. (4) 6G-4362 Shim Pack Thickness ... 4.49 mm (0.177 inch)Note: See the Steering System Testing and Adjusting, "Front Wheel Bearing - Adjust" in order to determine the amount of shims to use. (5) Lubricate the shaft and the seal slightly with the lubricant that is being sealed prior to assembly. (6) Mounting surfaces must be free of paint and grease prior to assembly.