KIT-SEAL- 2292759 - Caterpillar

Personal injury or death can result from sudden suspension cylinder movement. Sudden movement, up or down, can cause the clearance above your head to change rapidly. Read all warning labels on the suspension cylinders before servicing. Do not check the oil in the suspension cylinder until all the nitrogen pressure has been released. Do not, under any condition, remove valves, cover or plugs from the cylinder unless the rod is fully retracted and all the nitrogen pressure is released. Do not stand under the machine when testing or adjusting the suspension cylinders.
(1) Dimension from the center lines of the top and bottom pins: Empty (retracted) ... 1063 mm (41.9 in)Oil charge only ... 1063 mm (41.9 in)Full charge (oil and nitrogen) (vehicle empty) ... 1190 mm (46.9 in)(2) Bore of new cylinder ... 361.95 + 0.13 - 0.05 mm (14.250 + .005 - .002 in)(3) Bore of new head ... 317.58 0.03 mm (12.503 .001 in)(4) Diameter of new rod ... 317.43 0.05 mm (12.500 .002 in)(5) Torque for valve assembly ... 50 10 N m (37 7 lb ft)