2295538 KIT-SEAL Caterpillar parts
Rating:
Alternative (cross code) number:
CA2295538
229-5538
2295538
CA2295538
229-5538
2295538
Weight: 0.01 pounds 0 kg.
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
229-5538 2295538 Hydraulic Cylinder Seal KIT Fits Caterpillar Cat Spare Parts Replacement Aftermarket
Generic 【INTEGRATED TOOLCARRIER】IT28G || 【EXCAVATOR】375-A 375-A L 350 L 350-A || 【WHEEL LOADER】928H 930 988G 988H 930K
Generic 【INTEGRATED TOOLCARRIER】IT28G || 【EXCAVATOR】375-A 375-A L 350 L 350-A || 【WHEEL LOADER】928H 930 988G 988H 930K
2295538 Hydraulic Seal Kit fits Caterpillar Several
ZBOX 【FITMENT MODELS】 Fits Caterpillar Several || 【AMERICAN OWNED & OPERATED】Fully owned and operated within the United States, our business is dedicated to contributing to local economies, supporting American jobs, and fostering community growth. || 【QUALITY REPLACEMENT】Engineered for durability and performance, our parts meet or exceed OEM specifications. Ideal for construction and agriculture machinery, ensuring reliability and efficiency in tough working conditions. || 【PACK SIZE】This product is a pack of 1, making it easy to stock up and ensure you have the necessary parts on hand for maintenance.
ZBOX 【FITMENT MODELS】 Fits Caterpillar Several || 【AMERICAN OWNED & OPERATED】Fully owned and operated within the United States, our business is dedicated to contributing to local economies, supporting American jobs, and fostering community growth. || 【QUALITY REPLACEMENT】Engineered for durability and performance, our parts meet or exceed OEM specifications. Ideal for construction and agriculture machinery, ensuring reliability and efficiency in tough working conditions. || 【PACK SIZE】This product is a pack of 1, making it easy to stock up and ensure you have the necessary parts on hand for maintenance.
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g03345311
Typical example
Loosen hose clamp (2) and hose clamp (4) for hose assembly (1).
Disconnect hose assembly (1) from air inlet connection (3) and crankcase breather canister (8).
Loosen hose clamp (5) and hose clamp (7) (not shown) for hose assembly (6).
Disconnected hose assembly (11) (not shown) from crankcase breather canister (8).
Remove bolts (9) from crankcase breather canister (8).
Remove crankcase breather canister (8) and hose assembly (6) from bracket (10).
Remove hose assembly (6) from crankcase breather canister (8).
If necessary, disassemble the crankcase breather canister. Refer to Operation and Maintenance Manual, "Crankcase Breather (Canister) - Replace" for the correct procedure.
Illustration 2 g03345734
Follow Step 9.a through Step 9.g in order to disassemble valve mechanism cover (15).
Remove valve mechanism cover (15). Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install" for the correct procedure.
Remove bolts (12) from breather adapter (13).
Remove breather adapter (13) from valve mechanism cover (15).
Remove gasket (14).
Remove screws (18) and carefully remove baffle plate. (19).
Remove gauze (17) from valve mechanism cover (15).
If necessary, remove blanking plug (16) from valve mechanism cover (15). Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 247-5377 Torque Wrench 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Make sure that the components of the breather assembly are installed correctly. Engine damage may occur if the breather assembly is not working properly.
Illustration 3 g03345734
Clean all parts and inspect all parts. Replace any parts that are worn or damaged. Ensure that the cavity for the breather in valve mechanism cover (12) is clean and free from restriction.
If necessary, follow Step 2.a through Step 2.j in order to assemble valve mechanism cover (15).
Install gauze (17) to valve mechanism cover (15).
Position baffle plate (19) into valve mechanism cover (15).
Install screws (18) to baffle plate (19).
Tighten screws (18) to a torque of 1.5 N m (13 lb in).
If necessary, install a new blanking plug (16) to valve mechanism cover (15). Tighten blanking plug to a torque of 20 N m (177 lb in).
Position a new gasket (14) onto valve mechanism cover (15).
Position breather adapter (13) onto valve mechanism cover (15).
Install bolts (12) to breather adapter (13).
Tighten screws (12) to a torque of 1.5 N m (13 lb in).
Install valve mechanism cover (12). Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install" for the correct procedure.
Illustration 4 g03345311
Typical example
If necessary, assemble the crankcase breather canister. Refer to Operation and Maintenance Manual, "Crankcase Breather (Canister) - Replace" for the correct procedure.
Install hose assembly (6) onto crankcase breather canister (8). Ensure that hose clamp (5) and hose clamp (7) are correctly orientated.
Position crankcase breather canister (8) and hose assembly (6)
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g03345311
Typical example
Loosen hose clamp (2) and hose clamp (4) for hose assembly (1).
Disconnect hose assembly (1) from air inlet connection (3) and crankcase breather canister (8).
Loosen hose clamp (5) and hose clamp (7) (not shown) for hose assembly (6).
Disconnected hose assembly (11) (not shown) from crankcase breather canister (8).
Remove bolts (9) from crankcase breather canister (8).
Remove crankcase breather canister (8) and hose assembly (6) from bracket (10).
Remove hose assembly (6) from crankcase breather canister (8).
If necessary, disassemble the crankcase breather canister. Refer to Operation and Maintenance Manual, "Crankcase Breather (Canister) - Replace" for the correct procedure.
Illustration 2 g03345734
Follow Step 9.a through Step 9.g in order to disassemble valve mechanism cover (15).
Remove valve mechanism cover (15). Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install" for the correct procedure.
Remove bolts (12) from breather adapter (13).
Remove breather adapter (13) from valve mechanism cover (15).
Remove gasket (14).
Remove screws (18) and carefully remove baffle plate. (19).
Remove gauze (17) from valve mechanism cover (15).
If necessary, remove blanking plug (16) from valve mechanism cover (15). Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 247-5377 Torque Wrench 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Make sure that the components of the breather assembly are installed correctly. Engine damage may occur if the breather assembly is not working properly.
Illustration 3 g03345734
Clean all parts and inspect all parts. Replace any parts that are worn or damaged. Ensure that the cavity for the breather in valve mechanism cover (12) is clean and free from restriction.
If necessary, follow Step 2.a through Step 2.j in order to assemble valve mechanism cover (15).
Install gauze (17) to valve mechanism cover (15).
Position baffle plate (19) into valve mechanism cover (15).
Install screws (18) to baffle plate (19).
Tighten screws (18) to a torque of 1.5 N m (13 lb in).
If necessary, install a new blanking plug (16) to valve mechanism cover (15). Tighten blanking plug to a torque of 20 N m (177 lb in).
Position a new gasket (14) onto valve mechanism cover (15).
Position breather adapter (13) onto valve mechanism cover (15).
Install bolts (12) to breather adapter (13).
Tighten screws (12) to a torque of 1.5 N m (13 lb in).
Install valve mechanism cover (12). Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install" for the correct procedure.
Illustration 4 g03345311
Typical example
If necessary, assemble the crankcase breather canister. Refer to Operation and Maintenance Manual, "Crankcase Breather (Canister) - Replace" for the correct procedure.
Install hose assembly (6) onto crankcase breather canister (8). Ensure that hose clamp (5) and hose clamp (7) are correctly orientated.
Position crankcase breather canister (8) and hose assembly (6)
Caterpillar parts catalog:
Parts kit Caterpillar catalog:
5637274
KIT-CONVERSION
Caterpillar
Caterpillar
5637273
KIT-CONVERSION
Caterpillar
Caterpillar
5637272
KIT-CONVERSION
Caterpillar
Caterpillar
5622727
KIT-CONVERSION
Caterpillar
Caterpillar
5622543
KIT-CONVERSION
Caterpillar
Caterpillar
5620948
KIT-CONVERSION
Caterpillar
Caterpillar
3931371
KIT-GLASS
Caterpillar
Caterpillar
3875473
KIT-AIR CLEANER
Caterpillar
Caterpillar
3804849
KIT-PISTON
Caterpillar
Caterpillar
3804848
KIT-PISTON
Caterpillar
Caterpillar
3250847
KIT-SEAL
Caterpillar
Caterpillar
2470257
KIT-SEAL
Caterpillar
Caterpillar