KIT-SEAL 2320242 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-7692 Threaded Rod 2 Start By:
Remove the counterbalance valve. Refer to Disassembly and Assembly, "Counterbalance Valve (Travel) - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Drain the oil from the final drive into a suitable container for storage or disposal.
Illustration 1 g00707275
Disconnect hose assemblies (1) and (3). Remove two bolts (2).
Illustration 2 g00944825
Install Tooling (A) in the place of bolts (2).
Remove remaining bolt (2A) that secures travel motor (4) to the final drive.
Illustration 3 g00707267
Attach a suitable lifting device to travel motor (4). The weight of travel motor (4) is approximately 57 kg (125 lb). Carefully pull travel motor (4) out of the final drive.
Illustration 4 g00651795
Remove O-ring seal (5) from the travel motor.