KIT- 2322946 - Caterpillar

Rework Procedure
In addition to parts specified in the parts list, you will need 1 meter of 18 AWG GXL - ORANGE wire and 2 meters of 18 AWG GXL - BROWN wire.
1. Remove wire ID 133-C3103 OR-18 from connector C-C343 at pin 25. Insulate the terminal with heat shrink. Refer to Images1.1.1 and 1.1.2.
Parts Needed:
125-7874 Heat Shrink (Bulk Tube)
Image1.1.1
Image1.1.2
2. Splice into wire ID R800-OR circuit at machine control module at pin J1:69. Using the parts needed below, route new wire, id OR-18, to connector C-C343 at pin 25. Refer Images1.2.1 and 1.2.2.
Parts Needed:
9X-3401 Connector Pin (Qty 1)
Orange Wire (Qty 1 Meter)
9X-3402 Connector Socket (Qty 1)
Splice Wire Assembly (Qty 1)
115-8109 Splice (Qty 2)
Note: Procedure to make "Splice Wire Assembly" is shown in Image1.7.1
Image1.2.1
Image1.2.2
3. Remove wire id 200-P11 BK-18 from connector P-C312 at pin 2 and insulate the terminal with heat shrink. Refer to Images1.3.1 and 1.3.2.
Parts Needed:
125-7874 Heat Shrink (Bulk Tube)
Image1.3.1
Image1.3.2
4. Splice into wire id L731-BR ground circuit at connector P-C83, pin 2. Using the parts needed below, route new BR-18 wire to P-C312 at pin 2. Refer to Images1.4.1 and 1.4.2.
Parts Needed:
374-8372 Socket (Qty 1)
Brown Wire (Qty 1 Meter)
136-4877 Wire Splice (Qty 1)
Image1.4.1
Image1.4.2
5. Remove wire id 200-LP24 BK-18 from connector LP-C6 at pin 2 and insulate the terminal with heat shrink. Refer to Images1.5.1 and 1.5.2.
Parts Needed:
125-7874 Heat Shrink (Bulk Tube)
Image1.5.1
Image1.5.2
6. Splice into wire id L731-BR circuit at connector LP-C3, pin 2. Using the parts needed below, route new BR-18 wire to LP-C6, pin 2. Refer to Images1.6.1 and 1.6.2.
Parts Needed:
374-8372 Socket (Qty 1)
Brown Wire (Qty 1 Meter)
136-4877 Wire Splice (Qty 1)
Image1.6.1
Image1.6.2
Parts needed to make the "Splice Wire Assembly" is shown below and in Image1.7.1.
Parts Needed:
8T-8729 Connector Pin (Qty 2)
8T-8730 Connector Socket (Qty 1)
125-7874 Sealed Tube (Qty 5 CM)
18 AWG-SXL-YL Wire (Qty 4 DM)
Image1.7.1