KIT-GASKET-MCH 2326599 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 3E-3882 Eyebolt 2 Start By:
Remove the flexible exhaust pipe.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06208438
Remove shield (1).
Loosen clamps (4) and clamps (3).
Remove hose (2) and hose (5).
Illustration 2 g06208441
Remove bolts (6)
Remove shield (7).
Illustration 3 g06208450
Remove bolts (9).
Remove shield (8).
Illustration 4 g06208451
Remove bolts (10).
Disconnect latch mechanisms (11).
Remove shield assembly (12).
Illustration 5 g06208452
Remove bolts (14).
Remove shield (13).
Illustration 6 g06208453
Remove bolts (15).
Remove shield (16).
Illustration 7 g06208463
Remove bolts (17).
Remove shield (18).
Illustration 8 g06208465
Remove bolts (19).
Remove shield (20).
Illustration 9 g06208469
Remove bolts (21).
Remove shield (22).
Illustration 10 g06208470
Remove bolts (23).
Remove shield (24).