AVSPARE.COM
parts catalog

KIT-GASKET-SCH 2339200 - Caterpillar


2339200 KIT-GASKET-SCH Caterpillar parts
Rating:
69
Alternative (cross code) number:
CA2339200
233-9200
2339200
Caterpillar 2339200 KIT-GASKET-SCH
Weight: 2 pounds 1 kg.

Buy KIT-GASKET-SCH 2339200 Caterpillar genuine, new aftermarket tractor parts with delivery

Related part:
2339200  GASKET KT-YM  3930927  CL

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below
$239.54
 

05 Dec 2023
23.0[10.35] Pounds
US: Simple Tire
Pirelli Cinturato P7 All Season Plus Radial Tire - 235/45R18 94V
Pirelli Made in Italy || Package Height: 9.3" || Package Length: 26.4" || Package Width: 26.4" || Fit type: Universal Fit || Load capacity: 1477 pounds
  For full view, you need register

Information:


Refer to the engine Operation and Maintenance Manual for any coolant information that may be specific to that application.
Functions of Cooling System
The cooling systems of modern gas engines are precisely balanced. The performance of the cooling system affects many of the engine components. Optimum performance can only be obtained by proper installation and maintenance of the cooling system.The engine cooling system is designed to meet specific guidelines. The proper coolant/antifreeze will provide the following functions:
Adequate heat transfer
Compatibility with the cooling system components such as hoses, seals, and piping
Protection from water pump cavitation
Protection from other cavitation erosion
Protection from freezing and from boiling
Protection from the buildup of corrosion, of sludge, and of scaleIf a cooling system fails to perform any of the above functions, the following conditions can occur:
Overheating
Overcooling
Leaks from hoses, from seals, and from piping
Cavitation erosion
Damage from freezing or from boiling
Plugging of passages for the coolant/antifreeze in components such as radiators, aftercoolers, oil coolers, and other heat exchangersMany engine failures are related to the above conditions: cracking of the cylinder head and/or of the engine block, piston seizure, leakage of the water pump, failure of the water pump and pitting of the cylinder liners and cylinder block.These problems can be avoided through proper maintenance of the cooling system. Periodically evaluate the maintenance practices in order to make sure that the cooling system is properly maintained.Properties of Coolant/Antifreeze
Coolant/antifreeze is normally composed of three elements: water, glycol and additives. Each element must meet specific guidelines.Water
Water is used in the cooling system in order to transfer heat.
Never use water alone without Supplemental Coolant Additives (SCA) or without inhibited coolant. Water alone is corrosive at engine operating temperatures. Water alone does not provide adequate protection against boiling or freezing.
Deionized water or distilled water is recommended for use in engine cooling systems.If distilled water or deionized water is not available, use water with the properties that are listed in Table 1.
Table 1
Caterpillar Minimum Acceptable Water Requirements
Property Maximum Limit ASTM Test
Chloride (Cl) 40 mg/L (2.4 grains per US gal) "D512", "D4327"
Sulfate (SO4) 100 mg/L (5.9 grains per US gal) "D516"
Total Hardness 170 mg/L (10 grains per US gal) "D1126"
Total Solids 340 mg/L (20 grains per US gal) "D1888"
Acidity pH of 5.5 to 9.0 "D1293"
Use of water that does not meet the recommendations for the cooling system will damage the cooling system.Do not use these types of water in the cooling system: sea water, softened water that has been conditioned with salt, hard water and tap water.Only use water that meets the recommendations for the cooling system.
If you are not sure about the properties of your water, consult one of the following sources for a water analysis:
Caterpillar dealer
Local water utility company
Agricultural agent
Independent laboratoryGlycol
Glycol in the coolant helps to provide protection against boiling and freezing.Note: Glycol used in finished coolants or in concentrates is inhibited using appropriate additives.Most conventional heavy-duty coolant/antifreezes use ethylene glycol. In many applications, propylene glycol may also be used. In a 50/50 mixture with water, ethylene and propylene glycol


Parts kit Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.