KIT-SEAL 2350354 - Caterpillar

Illustration 1 g03011817
Front view
Table 1
Specification for 242-6277 Engine Oil Lines Gp
Item Qty Part Specification Description
1 1 2W-1053 Plug Torque to 100 15 N m (74 11 lb ft).
2 1 8C-3446 Fluid Sampling Valve Torque to 11 to 13 N m (97 to 115 lb in).
3 1 2W-1969 Bypass Valve Valve must open with a pressure difference of 180 20 kPa (26 3 psi).
4 1 2W-1635 Spring Length under test force is 102.0 mm (4.02 inch).
Test force is 518 26 N (116 6 lb).
Free length after test is 143.4 mm (5.65 inch).
Illustration 2 g03011836
Right side view
Table 2
Specification for 242-6277 Engine Oil Lines Gp
Item Qty Part Specification Description
5 2 0S-1571 Bolt Use the following bolt tightening sequence in order to tighten the clamp bolts:
Place the clamp assembly so that the clamp assembly is snug against the tube assembly.
Tighten the clamp assembly to the elbow.
Tighten the clamp assembly to the tube assembly.
6 2 0S-1594 Bolt
7 6 109-2332 O-Ring Seal Lightly, lubricate the bore with the fluid that is being sealed.
8 2 6B-9202 Spring Length under test force is 68.3 mm (2.69 inch).
Test force is 84.5 to 99.6 N (19.0 to 22.4 lb).
Free length after test is 112.7 mm (4.44 inch).
9 2 7N-7697 Plunger Valves must start to open at a pressure difference of 130 30 kPa (19 4 psi) .
Valves must be fully open at a pressure difference of 200 30 kPa (29 4 psi).