KIT-SEAL- 2401661 - Caterpillar

Lubrication System
Auxiliary oil filter systems (if equipped) will require more oil. Refer to the specifications that are provided by the OEM of the auxiliary oil filter system.For the recommended oil, see this Operation and Maintenance Manual, "Fluid Recommendations" topic.
Table 1
3512
Change Interval and Sump Configuration 250 Hours Shallow Sump 500 Hours Standard Sump 1000 Hours Deep Sump
Capacity Gallons Liters Gallons Liters Gallons Liters
Factory Fill 52 197 85 322 165 625
Refill with Filter Change 41 155 82 311 162 614
Sump Only Refill without Filter Change 36 136 78 296 158 599
Volume between "Add" and "Full" Marks 6 23 18 68 28 106
Table 2
3516
Change Interval and Sump Configuration 250 Hours Shallow Sump 1000 Hours Deep Sump
Capacity Gallons Liters Gallons Liters
Factory Fill 57 216 214 811
Refill with Filter Change 50 190 211 800
Sump Only Refill without Filter Change 42 159 206 781
Volume between "Add" and "Full" Marks 5 19 36 136 Cooling System
To maintain the cooling system properly, the total capacity of the cooling system must be determined. The capacity of the total cooling system will vary between individual installations. The external system can include the following components: expansion tank, radiator, and piping. Refer to the specifications that are provided by the OEM. Record the total cooling system amount.For the recommended coolant, see this Operation and Maintenance Manual, "Fluid Recommendations" topic.
Table 3
3512 Approximate Refill Capacities for the Cooling Systems
Compartment or System Capacities
Engine plus jacket water system 261 L (69 US gal)
Engine plus jacket water system plus separate circuit aftercooler 291 L (77 US gal)
Table 4
3516 Approximate Refill Capacities for the Cooling Systems
Compartment or System Capacities
Engine plus jacket water system 307 L (81 US gal)
Engine plus jacket water system plus separate circuit aftercooler 352 L (93 US gal)