KIT-SEAL 2404819 - Caterpillar

Lubricant Capacities
The capacity of the engine lubrication system includes the capacity of the oil filters that are installed at the factory. Auxiliary oil filter systems (if equipped) will require additional oil. Refer to the specifications that are provided by the OEM of the auxiliary oil filter system.
Table 1
Approximate Refill Capacities for 3516C Lubrication System    
    Capacities Without Filter Change     Capacities With Filter Change    
Standard 250Hr Front Sump    
151.4 L (40 US gal)    
181.7 L (48 US gal)    
Standard 250Hr Rear Sump    
159 L (42 US gal)    
189.3 L (50 US gal)    
Deep 500Hr Front Sump    
270.7 L (71.5 US gal)    
300.9 L (79.5 US gal)    Coolant Capacities
To maintain the cooling system, the total cooling system capacity must be determined. The total cooling system capacity will vary between individual installations. The total cooling system capacity can include the following components: engine, expansion tank, heat exchanger, radiator and piping.Refer to the specifications that are provided by Caterpillar or the OEM of the installation. Record the total cooling system capacity in the appropriate Table.
Table 2
Approximate Refill Capacities for the 3516C Cooling System    
Compartment or System    Capacities    
Jacket water system    
233 L (61.6 US gal)    
Separate circuit aftercooler    
56.8 L (15.0 US gal)    
External system (1)        
Total cooling system        
( 1 ) External system capacity to be determined by OEM installation.