KIT-SEAL- 2410900 - Caterpillar

Illustration 1 g06182641Note: Operating the machine without the upper strut properly secured will cause excessive loads on the frame and reduce frame life.Inspect the four fasteners to the upper strut connection on each side of the machine for loose or broken fasteners. Refer to illustration 1.Inspect the torque converter and the transmission for leaks.Check the level in the fuel tank . Look for any leaks in the fuel tank. Look for damage to the fuel tank.Inspect the rear axle for leaks. Check the rear suspension cylinders for leaks and for damage. Check the lights for proper operation. Inspect the lights for damage.Inspect the hydraulic tank for leaks and for damage. Make sure that the filler cap is installed.Inspect the steering tank for leaks and for damage. Make sure that the filler cap is installed.Check the level gauge on the automatic lubricant reservoir. Inspect the automatic lubricant reservoir for leaks.Remove any debris that may obstruct the air filters. Remove any debris from the platform.Make sure that the ladders, stairs, and hand rails are secure.Make sure that all of the windows and mirrors are clean. Make sure that the operator's vision is not impaired by dust, mud, or other foreign materials. Adjust the mirrors for proper vision. Refer to Operation and Maintenance Manual, "Mirror" for the proper position of the mirrors.
When it is necessary to work under the machine with the body (bed) raised, attach the body (bed) retaining cable to the rear tow point. Install the rear tow point pin through the end of the retaining cable.Failure to properly secure the body (bed) may result in personal injury or death.
Raise the dump body to the fully raised position and install the truck body retaining cable to the rear tow point pin. For the proper procedure, refer to Operations and Maintenance Manual, "Cable (Truck Body Retaining)".Inspect the body and the frame for damage.Inspect the hoist cylinders for leaks or for damage. Inspect the hoist cylinders for cracking on the chrome and for marks on the chrome.Perform the following daily procedures for your machine:
Operation and Maintenance Manual, "Air Tank Moisture and Sediment - Drain"
Operation and Maintenance Manual, "Backup Alarm - Test"
Operation and Maintenance Manual, "Brakes, Indicators and Gauges - Test"
Operation and Maintenance Manual, "Cooling System Coolant Level - Check"
Operation and Maintenance Manual, "Differential and Final Drive - Check"
Operation and Maintenance Manual, "Engine Oil Level - Check"
Operation and Maintenance Manual, "Engine Oil Level - Log Additions"
Operation and Maintenance Manual, "Hoist, Torque Converter and Brake Tank Oil Level - Check"
Operation and Maintenance Manual, "Seat Belt - Inspect"
Operation and Maintenance Manual, "Steering System Oil Level - Check"
Operation and Maintenance Manual, "Transmission Tank Oil Level - Check"