KIT-SEAL- 2417619 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 1
8T-0292 Bolt 1 Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g01526249
Attach Tooling (A) and a suitable lifting device to hydraulic control valve (16). Install hydraulic control valve (16). The weight of the hydraulic control valve (16) is approximately 61 kg (135 lb).
Illustration 2 g01526242
Install bolts (14). Connect harness assembly (15) from the valve.
Illustration 3 g01526253
Install O-ring seals (13) to sleeves (9) and (12).
Illustration 4 g01526240
Install sleeves (12) and (9). Reposition harness assembly (11). Connect harness assembly (11) to the solenoids (8) and sensors (10).
Illustration 5 g01526241
Install flange (7). Install bolts (6). Repeat for the other side.
Illustration 6 g01525681
Connect hose assemblies (5).Note: Replace gasket (4) with new before installation.
Illustration 7 g01525679
Install gasket (4) (not shown). Install cover (3). Install step plate (2). Install bolts (1).