KIT-SEAL- 2422558 - Caterpillar

Machine Control & Guidance ProductsCAES ULTRA (S/N: 2TZ1-UP)Petroleum Engine3512C (S/N: R1T1-UP)3512C PETROLEUM (S/N: R1S1-UP)PumperSPF343C (S/N: RTX1-UP)Introduction
This Special Instruction is to be used with the Installation Special Instruction for your specific machine to upgrade the following components:
MS740 GPS Receiver
MS840 GPS Receiver
MS860 GPS Receiver
L1/L2 GPS antennas with GPS MS980 Receiver for CAESultra
L1/L2 GPS antennas with GPS MS990 Receiver for CAESultraImportant Safety Information
Work safely. Most accidents that involve product operation, maintenance, and repairs are caused by failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing potentially hazardous situations before an accident occurs. A person must be alert to potential hazards. This person should also have the necessary training, skills, and tools to perform these functions properly.Safety precautions and warnings are provided in this instruction and on the product. If these hazard warnings are not heeded, bodily injury or death could occur to you or to other persons. Caterpillar cannot anticipate every possible circumstance that might involve a potential hazard. Therefore, the warnings in this publication and the warnings that are on the product are not all inclusive.When a tool, procedure, work method, or operating technique that Caterpillar does not recommend is used, ensure that you and others are safe during use. Ensure that the product will not be damaged or made unsafe by the operation, lubrication, maintenance, or repair procedures that are used.
Do not operate or work on this machine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in injury or death. Contact your Cat dealer for replacement manuals. Proper care is your responsibility.
Electrocution Hazard! Keep the machine and attachments a safe distance from electrical power. Stay clear 3 m (10 ft) plus twice the line insulator length. Read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions and warnings will cause serious injury or death
Machine swings. Stay back. Crushing hazard could cause serious injury or death.
Accidental engine starting can cause injury or death to personnel working on the equipment.To avoid accidental engine starting, disconnect the battery cable from the negative (−) battery terminal. Completely tape all metal surfaces of the disconnected battery cable end in order to prevent contact with other metal surfaces which could activate the engine electrical system.Place a Do Not Operate tag at the Start/Stop switch location to inform personnel that the equipment is being worked on.
Personal injury or death can result from sudden machine movement.Sudden movement of the machine can cause injury to persons on or near the machine.Prevent possible injury by performing the procedure that follows before working on the machine.Move the machine to a smooth horizontal location. Move away from working machines and personnel and lower the bucket to the ground.Permit only one operator on the machine. Keep all other personnel away from machine or in view of the operator.Engage the parking brake. Stop the engine.Move the hydraulic control