2431067 KIT-SEAL Caterpillar parts
CB-434D, CB-534D, CB-54, CB-564D, CB-64, CS-533E
Rating:
Alternative (cross code) number:
CA2431067
243-1067
2431067
CA2431067
243-1067
2431067
Weight: 0.14 pounds 0 kg.
VIBRATORY COMPACTOR,
This part in 4 request:
Show.
This information for suppliers only!
2022-09-25
2022-09-25
2022-07-07
2019-07-22
Compatible equipment models: 2431067:
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8S-7611 Tube Assembly 2
8S-7615 Pin 2
8S-7640 Stand 2
B 183-4797 Track Roller Lifting Fork 1 Note: There is a track guide on each side of the machine. The procedure which follows is for the installation of the track roller with the track guide.
Make sure that all the mounting surfaces on the following components are clean and free of debris before the following components are installed:
Track Roller
Track Guide
Rock Guards
Frame Rail
Illustration 1 g00664675Note: Make sure that the fill/drain plug in the track roller is facing toward the outside of the undercarriage.
Use a suitable lifting device and Tooling (B) in order to put track roller (3) in position on the undercarriage. The weight of the track roller is approximately 40 kg (88 lb).
Install the bolts that hold the track roller in position.
Illustration 2 g00664663
Use Tooling (B) in order to put track guide (2) in position on the undercarriage. Install the bolts that secure the guide.
Illustration 3 g00664665
(X) Rock guard
Install the rock guards, if equipped.
Prior to lowering the machine to the ground and tightening the track, make sure that all of the track rollers rotate smoothly by manually turning the track rollers.
Illustration 4 g00489826
Lift the machine off Tooling (A).
Remove Tooling (A) from the machine. Lower the machine to the floor.
Tighten the tension of the track. Refer to Operation and Maintenance Manual, "Track Adjustment - Adjust".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8S-7611 Tube Assembly 2
8S-7615 Pin 2
8S-7640 Stand 2
B 183-4797 Track Roller Lifting Fork 1 Note: There is a track guide on each side of the machine. The procedure which follows is for the installation of the track roller with the track guide.
Make sure that all the mounting surfaces on the following components are clean and free of debris before the following components are installed:
Track Roller
Track Guide
Rock Guards
Frame Rail
Illustration 1 g00664675Note: Make sure that the fill/drain plug in the track roller is facing toward the outside of the undercarriage.
Use a suitable lifting device and Tooling (B) in order to put track roller (3) in position on the undercarriage. The weight of the track roller is approximately 40 kg (88 lb).
Install the bolts that hold the track roller in position.
Illustration 2 g00664663
Use Tooling (B) in order to put track guide (2) in position on the undercarriage. Install the bolts that secure the guide.
Illustration 3 g00664665
(X) Rock guard
Install the rock guards, if equipped.
Prior to lowering the machine to the ground and tightening the track, make sure that all of the track rollers rotate smoothly by manually turning the track rollers.
Illustration 4 g00489826
Lift the machine off Tooling (A).
Remove Tooling (A) from the machine. Lower the machine to the floor.
Tighten the tension of the track. Refer to Operation and Maintenance Manual, "Track Adjustment - Adjust".
Caterpillar parts catalog:
Parts kit Caterpillar catalog:
3603986
KIT-BEARING
3054C, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314E CR, 314E LCR, 316E L, 318D2 L, 318E L, 414E, 416E, 416F, 420E, 420F, 422E, 422F, 428D, 428E, 428F, 430D, 430E, 430F, 432E, 432F, 4...
3054C, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314E CR, 314E LCR, 316E L, 318D2 L, 318E L, 414E, 416E, 416F, 420E, 420F, 422E, 422F, 428D, 428E, 428F, 430D, 430E, 430F, 432E, 432F, 4...
3341997
KIT-PISTON RING
3054C, 3054E, 416D, 416E, 422E, 422F, AP-300, C4.4, CB-434D, CS-323C, CS-423E, TH210, TH215
3054C, 3054E, 416D, 416E, 422E, 422F, AP-300, C4.4, CB-434D, CS-323C, CS-423E, TH210, TH215
2767476
KIT-PISTON RING
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 416E, 420E, 420F, 422E, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 450E, 553C, 559, 613G, 914G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, ...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 416E, 420E, 420F, 422E, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 450E, 553C, 559, 613G, 914G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, ...
3802065
KIT-PISTON RING
120M, 12M, 2470C, 416E, 420E, 420F, 422E, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 450E, 553C, 559, 613G, 914G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-300D, AP-600D, A...
120M, 12M, 2470C, 416E, 420E, 420F, 422E, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 450E, 553C, 559, 613G, 914G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-300D, AP-600D, A...
3017292
KIT-SERVICE METER
140G, 303.5C, 303C CR, 304C CR, 305C CR, 312D, 312D L, 314D LCR, 315D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D L, 320D LRR, 320D RR, 321D LCR, 322C FM, 323D L, 323D LN, 323D SA, 324D FM, 324D FM LL...
140G, 303.5C, 303C CR, 304C CR, 305C CR, 312D, 312D L, 314D LCR, 315D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D L, 320D LRR, 320D RR, 321D LCR, 322C FM, 323D L, 323D LN, 323D SA, 324D FM, 324D FM LL...
3544754
KIT-WATER PUMP
120M, 12M, 2470C, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 420E, 430E, 450E, 553C, 559, 613G, 914G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG...
120M, 12M, 2470C, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 420E, 430E, 450E, 553C, 559, 613G, 914G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG...
2785225
KIT-SENSOR
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 420E, 430E, 450E, 553C, 559, 613G, 914G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG500E, BG600D, BG655D, C4.4...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 420E, 430E, 450E, 553C, 559, 613G, 914G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG500E, BG600D, BG655D, C4.4...
3113858
KIT-SENSOR
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 420E, 430E, 450E, 553C, 559, 613G, 914G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG500E, BG600D, BG655D, C4.4...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 420E, 430E, 450E, 553C, 559, 613G, 914G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG500E, BG600D, BG655D, C4.4...
3620289
KIT-SERVICE METER
216B3, 226B3, 236B3, 242B3, 247B3, 252B3, 257B3, 259B3, AP-1055D, BG-2455D, BG-260D, CB-434D, CB-534D, CB-54, CB-564D, CB-64, CD-54, D8R
216B3, 226B3, 236B3, 242B3, 247B3, 252B3, 257B3, 259B3, AP-1055D, BG-2455D, BG-260D, CB-434D, CB-534D, CB-54, CB-564D, CB-64, CD-54, D8R
1168660
KIT-SERVICE METER
902, 906, 908, CB-434D, CB-534D, CB-634D, D6F SR, D6G SR, D6H, D6H XL, D6H XR, D7H, D8N, D8R
902, 906, 908, CB-434D, CB-534D, CB-634D, D6F SR, D6G SR, D6H, D6H XL, D6H XR, D7H, D8N, D8R
2142465
KIT-SERVICE METER
902, 906, 908, AP-1055D, AP-655C, BG-2455D, BG-260D, CB-434D, CB-534D, CB-564D, CB-634D, D6E
902, 906, 908, AP-1055D, AP-655C, BG-2455D, BG-260D, CB-434D, CB-534D, CB-564D, CB-634D, D6E
1143616
KIT-SEAL
1090, 1190, 1190T, 1290T, 12M 2, 1390, 140M, 160M, 2290, 2390, 2391, 2491, 2590, 320B FM LL, 320C FM, 320D, 320D FM, 320D FM RR, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325B L, 325C FM, 325D FM, 3...
1090, 1190, 1190T, 1290T, 12M 2, 1390, 140M, 160M, 2290, 2390, 2391, 2491, 2590, 320B FM LL, 320C FM, 320D, 320D FM, 320D FM RR, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325B L, 325C FM, 325D FM, 3...
2204348
KIT-SEAL
CP-433E, CP-44, CS-323C, CS-433E, CS-44
CP-433E, CP-44, CS-323C, CS-433E, CS-44
2192542
KIT-SEAL
CP-433E, CS-433E
CP-433E, CS-433E
2308772
KIT-SENSOR
CB-634D
CB-634D
2292296
KIT-DETENT
CB-634D
CB-634D
2280816
KIT-VALVE
CB-634D
CB-634D
2258793
KIT-SEAL
CB-634D
CB-634D
2490915
KIT-DISTRIBUTOR
CB-434D
CB-434D
2490916
KIT-BRAKE
CB-434D
CB-434D
2490914
KIT-CYLINDER
CB-434D
CB-434D
2490912
KIT-BEARING
CB-434D
CB-434D
2494309
KIT-SHIM
CB-434D
CB-434D
2502946
KIT-POR VALVE
CB-434D
CB-434D