KIT-SEAL 2460656 - Caterpillar

Service a new machine every 10 Service Hours only within the initial 100 service hours.After the initial 100 service hours of operation, service the boom, the stick, the bucket and the blade linkage after Every 50 Service Hours. If the machine is operated under severe conditions that might cause abrasive material to enter the cylinder bearings or if the hydraulic hammer is used, service the boom, the stick, the bucket and the blade linkage after Every 10 Service Hours.Wipe all fittings before you apply lubricant. 1. Apply lubricant through fittings (1). These fittings are located on the rod end of the blade cylinder.2. Apply lubricant through fittings (2). These fittings are located on the bar that supports the blade.3. Apply lubricant through fittings (3). These fittings are located on the head end of the blade cylinder.