2461240 KIT-REPAIR Caterpillar parts
3606, 3608, 3612, 3616, 793F, 793F AC, 793F CMD, 793F OEM, 795F AC, 797F, C175-20, C280-12, C280-16, C280-6, C280-8, G3508, G3508B, G3512, G3512B, G3516, G3516B, G3520B, G3606, G3606B, G3608, G3612, G...
Rating:
Alternative (cross code) number:
CA2461240
246-1240
2461240
CA2461240
246-1240
2461240
Weight: 0.20 pounds 0 kg.
GAS ENGINE, TRUCK,
Compatible equipment models: 2461240:
Information:
Illustration 3 g00582788
Remove two brackets (5). Place wiring harness (6) free of hard bar (7). Repeat this step for the other side.
Illustration 4 g00582790
Use Tooling (A). Support hard bar (7) .
Illustration 5 g00582792
Remove two bolts (8) and two washers (9) .
Illustration 6 g00582793
Remove four bolts (10), four bolts (12) and tube (11) .
Illustration 7 g00582795
Install Tooling (B). Remove pin (13) from bracket (14) and hard bar (7). Repeat this step for the other side.Note: There are two spring pins between hard bar (7) and the remaining undercarriage. Remove both pins (13). Separate hard bar (7) from undercarriage. Use Tooling (A). Remove hard bar (7). The weight of the hard bar is 295 kg (650 lb).
Illustration 8 g00582796
Illustration 9 g00582797
Install Tooling (C). Use Tooling (C) to remove bearing (15) from hard bar (7) and support (14). Repeat this step for all remaining bearings.Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 10 g00582800
Use Tooling (D) to install bearings into support (14) and hard bar (7). Use a suitable Tool to install pins (13) .
Illustration 11 g00582793
Install tube (11), four bolts (12) and four bolts (10) .
Illustration 12 g00582792
Install two washers (9) and two bolts (8) .
Illustration 13 g00582790
Remove Tooling (A) from hard bar (7) .
Illustration 14 g00582788
Reposition wiring harness (6) for hard bar (7). Install two brackets (5) .
Illustration 15 g00582785
Illustration 16 g00581971
Connect wiring harness (4). Install plate (2), the 12 bolts and washers (3). Install cover (1) .
Fill the hydraulic system. Refer to Operation and Maintenance Manual, SEBU7204, "Hydraulic System Oil - Change" for the correct procedure.End By:
Install the covers (right side). Refer to Disassembly and Assembly, "Covers - Remove and Install" for the machine that is being serviced.
Install the undercarriage (right side). Refer to Disassembly and Assembly, "Undercarriage - Install" for the machine that is being serviced.
Cat SIS web machinery list:
Parts kit Caterpillar catalog:
1187859
KIT-GASKET
3516, G3508, G3512, G3516
3516, G3508, G3512, G3516
1053764
KIT-ALTERNATOR TERMINAL
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 14H NA, 160H, 160H ES, 160H NA, 163H NA, 16H NA, 24H, 30/30, 3116, 3126B, 3176B, 3176C, 3196, 3306C, 330B L, 3...
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 14H NA, 160H, 160H ES, 160H NA, 163H NA, 16H NA, 24H, 30/30, 3116, 3126B, 3176B, 3176C, 3196, 3306C, 330B L, 3...
9X6591
KIT-GASKET
G3508, G3512, G3516
G3508, G3512, G3516
1052546
KIT-GASKET
G3516
G3516
1433620
KIT-GASKET
777D, G3512, G3516
777D, G3512, G3516
1651681
KIT-GASKET
G3512
G3512
6I2025
KIT-VALVE SEAL
G3606, G3606B, G3608
G3606, G3606B, G3608
2G6664
KIT-DIAPHRAGM
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H, 163H NA, 16G, 16H, 16H NA, 5130, ...
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H, 163H NA, 16G, 16H, 16H NA, 5130, ...
1800040
KIT-COVER
613G, 621G, 621H, 621K, 623G, 623H, 623K, 623K LRC, 627G, 627H, 627K, 627K LRC, 631G, 637G, 657G, 69D, 769D, 771D, 773D, 773E, 775D, 775E, 776D, 777D, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789...
613G, 621G, 621H, 621K, 623G, 623H, 623K, 623K LRC, 627G, 627H, 627K, 627K LRC, 631G, 637G, 657G, 69D, 769D, 771D, 773D, 773E, 775D, 775E, 776D, 777D, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789...
9T1364
KIT-SCREEN
784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793F, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 994, 994D, 994F, 994H
784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793F, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 994, 994D, 994F, 994H
1937639
KIT-SEAL
793B, 793C, 793D, 793F, 793F AC, 793F OEM, 793F-XQ
793B, 793C, 793D, 793F, 793F AC, 793F OEM, 793F-XQ
3507157
KIT-HYD CYLINDER SEAL
793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ
793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ
2461239
KIT-REBUILD
3606, 3608, 3612, 3616, 793F, 793F AC, 793F CMD, 793F OEM, 795F AC, 797F, C175-20, C280-12, C280-16, C280-6, C280-8, G3508, G3508B, G3512, G3512B, G3516, G3516B, G3520B, G3606, G3606B, G3608, G3612, G...
3606, 3608, 3612, 3616, 793F, 793F AC, 793F CMD, 793F OEM, 795F AC, 797F, C175-20, C280-12, C280-16, C280-6, C280-8, G3508, G3508B, G3512, G3512B, G3516, G3516B, G3520B, G3606, G3606B, G3608, G3612, G...
2461237
KIT-TURBINE WHEEL
3606, 3608, 3612, 3616, 793F, 793F AC, 793F CMD, 793F OEM, 795F AC, 797, 797B, 797F, C175-20, C280-12, C280-16, C280-6, C280-8, G3508, G3508B, G3512, G3512B, G3516, G3516B, G3520B, G3606, G3606B, G360...
3606, 3608, 3612, 3616, 793F, 793F AC, 793F CMD, 793F OEM, 795F AC, 797, 797B, 797F, C175-20, C280-12, C280-16, C280-6, C280-8, G3508, G3508B, G3512, G3512B, G3516, G3516B, G3520B, G3606, G3606B, G360...
3620158
KIT-REGULATOR
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 3612, 3616, C175-16, C175-20, C280-12, C280-16, C32
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 3612, 3616, C175-16, C175-20, C280-12, C280-16, C32
2848288
KIT-TURBOCHARGER
3606, 3608, 3612, 3616, C280-16, C280-8
3606, 3608, 3612, 3616, C280-16, C280-8
2769508
KIT-TURBOCHARGER
3606, 3608, 3612, 3616, C280-16, C280-6, C280-8
3606, 3608, 3612, 3616, C280-16, C280-6, C280-8
7W2819
KIT-RELIEF VALVE
3606, 3608, 3612, 3616, C280-12, C280-16, C280-6, C280-8, G3606, G3606B, G3608, G3612, G3616
3606, 3608, 3612, 3616, C280-12, C280-16, C280-6, C280-8, G3606, G3606B, G3608, G3612, G3616
1695428
KIT-SEAL REPAIR
3606, 3608, 3612, 3616, C280-12, C280-16, C280-6, C280-8, G3606, G3608, G3612, G3616
3606, 3608, 3612, 3616, C280-12, C280-16, C280-6, C280-8, G3606, G3608, G3612, G3616
2833489
KIT-RECEPTACLE
3606, 3608, 3612, 3616, C280-12, C280-16, C280-6, C280-8, CB-44B, CB-54B, CD-54B, CG137-08, CG137-12, G3304B, G3306B, G3408C, G3412, G3508, G3508B, G3512, G3512B, G3516, G3516B, G3520B
3606, 3608, 3612, 3616, C280-12, C280-16, C280-6, C280-8, CB-44B, CB-54B, CD-54B, CG137-08, CG137-12, G3304B, G3306B, G3408C, G3412, G3508, G3508B, G3512, G3512B, G3516, G3516B, G3520B
1837612
KIT-SEAL
3608, 3616
3608, 3616
3161504
KIT-SEAL
3606, 3608, 3612, 3616
3606, 3608, 3612, 3616
1777230
KIT-MARKER
3606, 3608, 3612, 3616
3606, 3608, 3612, 3616
3761380
KIT-PINION
3612, 3616, 793F, 793F AC, 793F CMD, 793F OEM, 795F AC, C280-12, C280-16
3612, 3616, 793F, 793F AC, 793F CMD, 793F OEM, 795F AC, C280-12, C280-16