2473247 KIT-PUMP SHAFT Caterpillar parts
CB-214E, CB-22
Rating:
Alternative (cross code) number:
CA2473247
247-3247
2473247
CA2473247
247-3247
2473247
Weight: 2 pounds 0 kg.
VIBRATORY COMPACTOR,
Number on catalog scheme:
2
For full view, you need register
Information:
Removal Procedure
Start By:
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release".
Remove the track. Refer to Disassembly and Assembly, "Track - Remove and Install".
Remove the final drive sprocket. Refer to Disassembly and Assembly, "Final Drive Sprocket - Remove and Install".
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines and on all hoses for installation purposes. Plug all lines and all hoses. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g00723963
Remove bolts (1) and washers.
Remove cover (2) .
Illustration 2 g00726946
Disconnect hose assemblies (3), (4), (5), and (6) from the travel motor.
Illustration 3 g00726947
Use a suitable lifting device to support the travel motor.
Remove bolts (7) and washers from the travel motor.
Illustration 4 g00726948
Remove travel motor (8) from the undercarriage frame with a suitable lifting device. Weight of the travel is 60 kg (132 lb).
Repeat Steps 1 through 6 for the other side of the travel motor.
Start By:
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release".
Remove the track. Refer to Disassembly and Assembly, "Track - Remove and Install".
Remove the final drive sprocket. Refer to Disassembly and Assembly, "Final Drive Sprocket - Remove and Install".
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines and on all hoses for installation purposes. Plug all lines and all hoses. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g00723963
Remove bolts (1) and washers.
Remove cover (2) .
Illustration 2 g00726946
Disconnect hose assemblies (3), (4), (5), and (6) from the travel motor.
Illustration 3 g00726947
Use a suitable lifting device to support the travel motor.
Remove bolts (7) and washers from the travel motor.
Illustration 4 g00726948
Remove travel motor (8) from the undercarriage frame with a suitable lifting device. Weight of the travel is 60 kg (132 lb).
Repeat Steps 1 through 6 for the other side of the travel motor.
Caterpillar parts catalog:
Parts kit Caterpillar catalog:
232B, 242B, 247B, 3011C, 3013, 3013C, 3014, 3024, 3024C, 303.5, 304.5, C1.1, C1.5, C2.2, CB-214E, CB-334E
120H, 120H ES, 120H NA, 135H, 135H NA, 216, 216B, 216B3, 226B, 226B3, 232B, 236, 236B, 236B3, 242B, 242B3, 246C, 247B, 247B3, 252B, 252B3, 256C, 257B, 257B3, 259B3, 262C, 262C2, 267B, 268B, 272C, 277C...
120H, 120H ES, 120H NA, 135H, 135H NA, 216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 242B, 247, 247B, 247B3, 248, 257B, 267, 30/30, 301.5, 301.6C, 301.7D, 301.7D CR, 302.2D, 302.4D, 302.5, 302.5C, 30...
16M, 24M, 3406C, 3412C, 3456, 572R II, 587T, 621F, 621G, 623F, 623G, 627F, 627G, 631E, 631G, 633E, 637E, 637G, 651E, 657E, 65E, 725, 730, 735, 740, 75C, 75E, 773F, 775F, 777F, 784B, 784C, 785B, 785C, ...
216, 216B, 216B3, 232B, 242B, 3013C, 3024, 3024C, 304.5, AP-255E, BB-621C, C1.1, C1.5, C2.2, CB-214E, CB-22, CB-334E, CB-34, CB22B, CB24B, CB32B, CB34B, CB34B XW, CC24B, CC34B
3013, 3013C, 302.5, 303.5, C1.1, C1.5, C2.2, CB-214D, CB-214E, CB-22, CB-334D, CB-334E, CB-335D, CB-34, CB22B, CB24B, CB32B, CC24B
1612629
KIT-CRANKSHAFT BEARING
3013C, C1.1, C1.5, C2.2, CB-22, CB-334E, CB-34, CB22B, CB24B, CB32B, CC24B
3013C, C1.1, C1.5, C2.2, CB-22, CB-334E, CB-34, CB22B, CB24B, CB32B, CC24B
3013, 3013C, 302.5, 303.5, C1.1, C1.5, C2.2, CB-214D, CB-214E, CB-22, CB-334D, CB-334E, CB-335D, CB-34, CB22B, CB24B, CB32B, CC24B
1805377
KIT-SEAL
CB-214D, CB-214E
CB-214D, CB-214E
2028839
KIT-SEAL
CB-214D, CB-214E
CB-214D, CB-214E
2470013
KIT-BOOT
CB-214E, CB-334E
CB-214E, CB-334E
2473249
KIT-SWASHPLATE
CB-214E
CB-214E
2402487
KIT-SWITCH
CB-214E, CB-334E
CB-214E, CB-334E
2470010
KIT-SPRING
CB-214E, CB-334E
CB-214E, CB-334E
2470014
KIT-SEAL
CB-214E, CB-334E
CB-214E, CB-334E
2470011
KIT-REPAIR
CB-214E, CB-334E
CB-214E, CB-334E
2470012
KIT
CB-214E
CB-214E
2470013
KIT-BOOT
CB-214E, CB-334E
CB-214E, CB-334E
2473254
KIT-SEAL
CB-214E, CB-22
CB-214E, CB-22
2473253
KIT-VALVE HOUSING
CB-14, CB-214E, CB-22, CB-334E, CB-34
CB-14, CB-214E, CB-22, CB-334E, CB-34
2473252
KIT-RELIEF VALVE
CB-214E
CB-214E
2473250
KIT-COVER
CB-214E, CB-22
CB-214E, CB-22
2473249
KIT-SWASHPLATE
CB-214E
CB-214E
2473248
KIT-HOUSING
CB-214E
CB-214E