KIT-BATTERY 2501183 - Caterpillar

Illustration 1 g03878011
Illustration 2 g03877227
View of area A
Remove 359-5555 Hose As (B) and 453-4764 Hose As (C). Discard all parts.
Remove two 8T-7927 Connectors (D). Discard the part.
Illustration 3 g06014107
Install hose assembly (1) and hose assembly (2) to the rear support assembly as shown in Illustration 3.
Illustration 4 g03877256
Detailed view of area E
Install two swivel tees (5) and two O-Ring Seals (6) as shown in Illustration 4.
Install two elbows (7), two O-Ring seals (8), and two O-Ring seals (9). Tighten elbows (7) to 200 25 N m (148 18 lb ft) as shown in Illustration 4.
Illustration 5 g06037255
Install bracket (13) along with three bolts (10), three hard washers (11), and three hard washers (12) as shown in Illustration 5.
Secure and install manifold (14) along with two bolts (15) , four hard washers (12), and two nuts (16) as shown in Illustration 5. Tighten bolts (15) to 55 10 N m (41 7 lb ft).
Install two plugs (17) with two O-Ring Seals (18) to manifold (14) as shown in Illustration 5. Tighten two plugs (17) to 150 20 N m (111 15 lb ft).
Install gasket (22) onto valve assembly (19). Install valve assembly (19) to manifold (14). Tighten valve assembly (19) to 190 30 N m (140 22 lb ft).
Illustration 6 g03878435
(G) Angle is 45 degrees.
(H) Angle is 70 degrees.
Install two elbows (20) to manifold (14) with two O-Ring seals (8) and two O-Ring seals (18). Orient two elbows (20) as per dimension shown in Illustration 5. Tighten two elbows (20) to 200 30 N m (148 22 lb ft).
Illustration 7 g06014137
Install hose assembly (3) and hose assembly (4) as shown in Illustration 7.